need help

[someoneelse]

need help from honda sifu here..

i drive eg8
recently its hard to start the engine(semput cam nak mati) and the check engine light went on
and sometime even after the engine can start the check light still on...

So i send my car to the foreman,after scan the ecu..it show cam sensor error..
he told me it came from distubutor..after changed the distrubutor its ok for a few days..now it happen again so i send to the foreman again..now he told me my ecu got problem..%$^&&

need advise......plzzz..

info : i convert my engine to 1.6 single cam vtec manual about two years ago.. but the ecu still auto.dunno if the related to the problem

 

[E-Tech]

Bro...
you ecu number is P08....
and highly possible it is ecu problem...
Do you read? Have you read my postings... Warning?


http://www.zerotohundred.com/newforums/honda/311961-drive-a-honda-civic-eg-ek-must-read.html

---------- Post added at 07:21 AM ---------- 6 hour anti-bump limit - Previous post was at 07:16 AM ----------

Take the ecu out and take good pictures like what "Ahlim" did and post it.
I try to see if got problems.. but pls follow above link and read...

 

[someoneelse]

i just read ur warning post.thanks i rarely loggin...
so now i need to search for new ecu?

---------- Post added at 10:30 PM ---------- 6 hour anti-bump limit - Previous post was at 10:29 PM ----------

i just read ur warning post.thanks i rarely loggin...
so now i need to search for new ecu? or can send to repair?

 

[E-Tech]

You are in Penang...
Me in Johor... if you are willing to send, then I will try to repair it, no gurantee.
So far my success rate in 100%..
But at least 1 week... send--> repair--> return. If want PM me....

If you go to half cut shop, n if lucky can get da ecu.. but RM400-600...

Anyway try put your ecu in ur friend's car... if same trouble, then confirm it is ecu...
Get the CEL- check light code and then contact me for more guides...