Need help from Sifu's

David_SGTi

Known Member
Senior Member
Aug 15, 2007
128
4
1,518
My Spec
4G93 with Mivec
ECU code 0450
175bhp at the flywheel
Mivec head
Mivec inlet and throttlebody
SAFC
RSPEC Shift light (activates mivec)
2.25 inch exhaust piping
2.3 inch exhaust with 2.5 inch outlet
K&N drop in filter

Sifu's, My question is how can i make it to 180hp to 200 hp on flywheel?
I tot 1.8 mivec engine should be 180++ hp.
Any suggestions and mods need to be done to achieve that horsepower please do teach me sifu.
And around what figure?

Thx in advanced sifu
 
Last edited:

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
1.8L mivec got so powerful??..

cylinder head pnp already??...
try switch to a better piggyback ecu such as emanage ultimate or a standalone ecu.... recallibrate the setting.... possible to net extra 10bhp...
and, mivec should have at least vafc rite??... safc can support mivec system??...
 

David_SGTi

Known Member
Senior Member
Thread starter
Aug 15, 2007
128
4
1,518
yes sifu, 175hp on crank....im finding emanage...i tot vafc oni support Vtec ( sori, noob here) but safc certainly can support mivec...
 

David_SGTi

Known Member
Senior Member
Thread starter
Aug 15, 2007
128
4
1,518
v racing?? i noe fuel do helps but i wan to noe wan can be done on engine
 

ken12292703

Drives a shopping cart...
Senior Member
Nov 14, 2003
1,542
8
5,138
SoMeWhErE
Yeah, a low pressure turbo can pump you 10HP to 20HP easily.:biggrin:

No need buy all expensive and new stuff, get those working second hand stuff will do. :biggrin:
 

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
yes sifu, 175hp on crank....im finding emanage...i tot vafc oni support Vtec ( sori, noob here) but safc certainly can support mivec...
err... vafc cannot support mivec meh??... haha... i thought mivec n vtec works almost the same, can support... paiseh paiseh...
 
Last edited by a moderator:

David_SGTi

Known Member
Senior Member
Thread starter
Aug 15, 2007
128
4
1,518
i hope without turbo i can get 200hp coz i wan fully n/a...so any idea??
 

boyzone

2,000 RPM
Senior Member
Mar 13, 2005
2,669
38
5,148
u can't get the high output is because u still running with stock GTI ecu.
Mivec stock ecu is ready with 2 stage air fuel and ignition timming mapping to support on high cam.
u need to a piggyback on ur set up, or go to get mivec full wiring and ecu to support.
good luck.
 

Northiswara

2,000 RPM
Senior Member
Dec 21, 2005
2,589
7
1,638
no wonder lar. the gti ecu dont kick in ur mivec like this cozs gti ecu dont know mivec.
 

V8_nutter

500 RPM
Senior Member
Aug 5, 2004
516
2
3,018
My Spec
4G93 with Mivec
ECU code 0450
175bhp at the flywheel
Mivec head
Mivec inlet and throttlebody
SAFC
RSPEC Shift light (activates mivec)
2.25 inch exhaust piping
2.3 inch exhaust with 2.5 inch outlet
K&N drop in filter

Sifu's, My question is how can i make it to 180hp to 200 hp on flywheel?
I tot 1.8 mivec engine should be 180++ hp.
Any suggestions and mods need to be done to achieve that horsepower please do teach me sifu.
And around what figure?

Thx in advanced sifu
Install 4 throttle, pm me for pricing.
 

Random Post Every 5 Minutes

Ppl out there..i need absolute help here...recently i just bought a nice set of rims, tat is ssr 15x7...n it is very2 light!...but the pcd is all 114.3....all 8 hole's!!!.My front tyres are already in 114.3 trim...as im using evo 1 brakes....n im out of idea's 2 change my rear end of satria to 114.3...how ah? how?..dun wan 2 sell da rims...as da rimss very cunn ohhh!! please help me on this...is there anyway?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience