NA to Evo 4 turbo

brokenjars

Known Member
Senior Member
Thread starter
Jun 7, 2012
229
16
1,518
Kedah
Also no, that's not a boost controller.... Just a turbotimer

*Not sure if clear, Not the same thing!
-turbotimer is basically a relay on a timer to turn off the car, nothing really fancy
-A boost controller is something that manages the boost via the wastegate (the wastegate is the physical device that lets off the excess boost)
In that case he dont have a boost controller I think, since he dont have an external wastegate
 

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
Wanted to know if the guy is running 4 lug or 5 lug rims, wondering how much of the car did the previous owner swap over. I know some people throw on everything down to the hubs.


Those are lancer cedia's... That's something you can swap floors with, the waja is a completely dif chassis, u cannot make a Waja look 100% like a EvoThe pillars and everything won't allow it to look like an evo , those Evo converts are are lancers... The waja is not a lancer, it's a completely different car,based off some Volvo design.

Waja 4wd I'm not saying cannot be done, I'm saying if done, it would be best to stay away, that kinda thing is basically a completely custom job, unless you know for certain the guy who did it knows his stuff, keep away, god knows how the guy designed everything underneath (remember unlike lancers the waja never was available with a 4wd floor plan)

MR peaks I'm not sure, but stock gsr 456789 I'm very sure peaks at 1.3. that I'm 100% sure.
Yeah my bad, it's Cedia, not Waja! Lol

Nope, I assure you all Evo 9 whether GSR, MR, or GT have peak 20+psi stock boost which is 1.4 bars! I believe the 8MR is also the same. It then tapers down to around 17psi or 1.2 bars. 8 GSR and below then peak around 19psi then tapers down to 16psi.
 

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
In that case he dont have a boost controller I think, since he dont have an external wastegate
Boost controller works with either external or stock internal wastegates. Maybe yours is either manual controller in the engine bay, or permanent boost set in the ECU. Manual controller in the engine bay could be a proper mechanical controller or a makeshift "tulang ikan" setup like mine last time! Lol
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Wanted to know if the guy is running 4 lug or 5 lug rims, wondering how much of the car did the previous owner swap over. I know some people throw on everything down to the hubs.
.
My Evo Great Grand Daddy running 4 lugs only, but mine not so much power......lol
 

sweelt

2,000 RPM
Nov 6, 2016
2,306
248
663
Penang
Hi guys, currently I'm interested to play turbo. Now playing NA car, neo vvl engine.
Was looking at a EVO 4 waja.
Since I'm new, I don't know much about turbo. So asking for help to understand the car specification.
Also need some clarifications on few things.
Engine stock evo 4 with evo 4 gearbox LSD locked. Evo 6 ecu.

1) Petrol tank 4wd evo 4 --> to get accurate fuel reading.
2) Engine evo 4, ecu evo 6 --> He said due to evo 6 ecu can adjust and remap, so no need management. He made the car exhaust to spit fire when high ram.. Is this true about evo 6 ecu better and is it good for the engine to spit fire lol.
3) He didn't use wastegate due to already setting ecu to boost at only 1.3-1.4 bar. He said its safer to avoid wastegate complications if it spoilt.
4) He installed speed density rom map sensor and airtemp sensor. Is this good?
5) have Sheepdog blowoff. What does this do?

Also, what kind of FC am I expecting out of a evo 4 engine lol. Leg is moderately heavy.

Thanks
bring your mech or friends who own "evo" to test the engine.
you can treat few KL taikor penang char keow teow. hahaha..

i not sure how long that waja been spitfire, is not good for engine internals.
don jump to conclusion yet.
 

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
VR too big and heavy, they transfer the technology over to lighter body.......lol
Actually CT9A is not that light, about 1.4 tons curb. How heavy is your VR? Couldn't remember my Eterna curb weight. It felt heavy coz NA not much power, and the handling was soft with more laggy steering.
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
rim is 17"x9jj
sorry i picked a random post to tag you... theres one question we forgot to ask.... this unit, can tukar nama without any hanky panky?


Actually CT9A is not that light, about 1.4 tons curb. How heavy is your VR? Couldn't remember my Eterna curb weight. It felt heavy coz NA not much power, and the handling was soft with more laggy steering.
old lancers were light and small compared to the galant.... they just got fatter as time went by..... overeating... ours just under 1.4 yea, but the evo X fuhh, its so heavy i got a minor shock finding out it weights in a almot 1.6 tons
 
  • Like
Reactions: vr2turbo

nw111

Known Member
Feb 13, 2018
81
34
518
Terra dei Motori
Those are lancer cedia's... That's something you can swap floors with, the waja is a completely dif chassis, u cannot make a Waja look 100% like a EvoThe pillars and everything won't allow it to look like an evo , those Evo converts are are lancers... The waja is not a lancer, it's a completely different car,based off some Volvo design.

Waja 4wd I'm not saying cannot be done, I'm saying if done, it would be best to stay away, that kinda thing is basically a completely custom job, unless you know for certain the guy who did it knows his stuff, keep away, god knows how the guy designed everything underneath (remember unlike lancers the waja never was available with a 4wd floor plan)

MR peaks I'm not sure, but stock gsr 456789 I'm very sure peaks at 1.3. that I'm 100% sure.
Ah yes... I remember. The Waja was based on (made for Europe) Mitsubishi Carisma (didn't have any charisma at all & didn't sell well).
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
old lancers were light and small compared to the galant.... they just got fatter as time went by..... overeating... ours just under 1.4 yea, but the evo X fuhh, its so heavy i got a minor shock finding out it weights in a almot 1.6 tons
Exactly, According to wiki, VR4 just pass 1.4, earlier Lancer 1.1 to 1.2 only. As they grew older put on weight back to 1.4......hhahahhahahhaa
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL
Yeah it probably has an internal wastegate already..because he told me it is complete stock engine.
He only have boost meter.. any other way to find out about the crank walk?
I read somewhere pressing the clutch and looking at the rpm can somewhat identify crank walk? True for evo 4 engine?
Eh dude - is this a friend you're buying from or a complete stranger? If a trustworthy friend you can probably trust his words to some extent but if it's a stranger get an expert or a mechanic to do a once over for the car. You sound like a deer facing oncoming traffic headlights.
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
Exactly, According to wiki, VR4 just pass 1.4, earlier Lancer 1.1 to 1.2 only. As they grew older put on weight back to 1.4......hhahahhahahhaa
kay i did not know it was that heavy back then! from wiki 1483kg, dont know what variant... mygod
 

brokenjars

Known Member
Senior Member
Thread starter
Jun 7, 2012
229
16
1,518
Kedah
sorry i picked a random post to tag you... theres one question we forgot to ask.... this unit, can tukar nama without any hanky panky?




old lancers were light and small compared to the galant.... they just got fatter as time went by..... overeating... ours just under 1.4 yea, but the evo X fuhh, its so heavy i got a m
sorry i picked a random post to tag you... theres one question we forgot to ask.... this unit, can tukar nama without any hanky panky?
Hanky panky involved for endorsement. He say he settle this. Need to endorse to tukar nama
 

brokenjars

Known Member
Senior Member
Thread starter
Jun 7, 2012
229
16
1,518
Kedah
Eh dude - is this a friend you're buying from or a complete stranger? If a trustworthy friend you can probably trust his words to some extent but if it's a stranger get an expert or a mechanic to do a once over for the car. You sound like a deer facing oncoming traffic headlights.
He is a stranger.. my friends dont play cars. Im the only one gila kereta. Gila seorang-orang.
Any sifu wanna help me on this? Lol
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
Hanky panky involved for endorsement. He say he settle this. Need to endorse to tukar nama
oh not endorsed yet.... if thats the case i would recommend you just skip.

not sure whats ur budget like but there are alternatives. perdana for one is an alternative which cant cost more.
 

brokenjars

Known Member
Senior Member
Thread starter
Jun 7, 2012
229
16
1,518
Kedah
oh not endorsed yet.... if thats the case i would recommend you just skip.

not sure whats ur budget like but there are alternatives. perdana for one is an alternative which cant cost more.
He said he can do it but it will costs more, thats why the delay. I dont mind as long as its endorsed and the car is legally mine.

Not really fancy the perdana, because i like the evo 4, ck deskboard, which the perdana dont have..
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
He said he can do it but it will costs more, thats why the delay. I dont mind as long as its endorsed and the car is legally mine.

Not really fancy the perdana, because i like the evo 4, ck deskboard, which the perdana dont have..
perdana dash looks better to me... to each his own i guess.

if ur going the hanky panky route, the neo is another option.
even better still would be ck converts but im guessing the waja is sicnificantly cheaper?
anyway u have options, just dont be too invested in the unit.

ok found the car, the n9 car i guess...
iv never seen pics of the car, but that enginebay looks very familiar.... am not sure if the guy has tried to part it before.
 
Last edited:

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
Hmm whenever hanky panky involved, I'd rather avoid it. Having a fast car ultimately is not a necessity, so not worth the risk of doing desparate illegal things, IMHO.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
He said he can do it but it will costs more, thats why the delay. I dont mind as long as its endorsed and the car is legally mine.

Not really fancy the perdana, because i like the evo 4, ck deskboard, which the perdana dont have..
Problem is, next time you want to sell, maybe cannot. Unless keep for life......
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
Another thing I wana mention....

His car is supposedly on a speed density setup, from the pics I can dig up, it's still for some reason got a maf sensor, WHY....
 

brokenjars

Known Member
Senior Member
Thread starter
Jun 7, 2012
229
16
1,518
Kedah
Another thing I wana mention....

His car is supposedly on a speed density setup, from the pics I can dig up, it's still for some reason got a maf sensor, WHY....
If u go to mudah and type in proton waja evo 4, his will be only car come up. Engine bay is yellow color. U looking at the same car?
 

Random Post Every 5 Minutes

Guys, I'm posting this behalf of my friend who owns a iswara. The story, he bought a water/rain strain remover (liquid form) and applied it. After applying it to the windscreen, a white/hazed layer formed. Even after few trials washing the windscreen with glass cleaner and few other liquids, the problem still there. So guys, any of you here have faced this kind of problem? Is there any method to brighten back the windscreen? Hope you guys can help us... Thanks a lot in advance...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience