- Joined
- Mar 22, 2007
- Messages
- 1,190
- Points
- 1,636
M2A.500D (Mono)
-500 watts into 2 ohms load at 0,5% THD
-250 watts into 4 ohms load at 0,1% THD
-TO3P transistor on amplifier stage
-Veriable Low pass x-over at 24/oct
-Variable Sub sonic filter from 20hz to 55hz at 24db/oct
-Adjustable Bass Boost from 0 to +12db at 45hz
-EBC external bass control
-Pre-amplified Line output
-High level input (booster In)
-Mos-Fet power supply
-Screws terminals connectors
M2A.290 (2ch Amp)
-90x2 watts into 2 ohms load at 0,1% THD
-60x2 watts into 4 ohms load at 0,1% THD
-TO3P transistor on amplifier stage
-Veriable Low-High-Band pass x-over at 18/12db/oct
-Multiplier x10 Frequency cutting
-Adjustable x-over from 30hz to 600hz (x1) 300hz to 6000hz (x10)
-Stereo/Mono mode selector (ST/mono Out)
-PWM Mos-Fet power supply
-High level input (booster In)
-Mos-Fet power supply
-Screws terminals connectors
M2A.490 (4ch Amp)
-90x4 watts into 2 ohms load at 0,1% THD
-60x4 watts into 4 ohms load at 0,1% THD
-TO3P transistor on amplifier stage
-Veriable Low-High-Band pass x-over at 18/12db/oct on rear section
-Veriable High pass x-over at 12db/oct on front section
-In/Out mode selector (2/4 ch In)(ST/Dual mono Out)
-Adjustable x-over from 30hz to 600hz
-High level input (booster In)
-Mos-Fet power supply
-Screws terminals connectors
For more information on effective installation, please call me at 019-648 2428. TQ
-500 watts into 2 ohms load at 0,5% THD
-250 watts into 4 ohms load at 0,1% THD
-TO3P transistor on amplifier stage
-Veriable Low pass x-over at 24/oct
-Variable Sub sonic filter from 20hz to 55hz at 24db/oct
-Adjustable Bass Boost from 0 to +12db at 45hz
-EBC external bass control
-Pre-amplified Line output
-High level input (booster In)
-Mos-Fet power supply
-Screws terminals connectors
M2A.290 (2ch Amp)
-90x2 watts into 2 ohms load at 0,1% THD
-60x2 watts into 4 ohms load at 0,1% THD
-TO3P transistor on amplifier stage
-Veriable Low-High-Band pass x-over at 18/12db/oct
-Multiplier x10 Frequency cutting
-Adjustable x-over from 30hz to 600hz (x1) 300hz to 6000hz (x10)
-Stereo/Mono mode selector (ST/mono Out)
-PWM Mos-Fet power supply
-High level input (booster In)
-Mos-Fet power supply
-Screws terminals connectors
M2A.490 (4ch Amp)
-90x4 watts into 2 ohms load at 0,1% THD
-60x4 watts into 4 ohms load at 0,1% THD
-TO3P transistor on amplifier stage
-Veriable Low-High-Band pass x-over at 18/12db/oct on rear section
-Veriable High pass x-over at 12db/oct on front section
-In/Out mode selector (2/4 ch In)(ST/Dual mono Out)
-Adjustable x-over from 30hz to 600hz
-High level input (booster In)
-Mos-Fet power supply
-Screws terminals connectors
For more information on effective installation, please call me at 019-648 2428. TQ