Knuckle conversion from 4 lugs to 5 lugs

[NeuroOne]

means take out brake disc n caliper perdana and replace with vrg is it
sorry so much question... newbie

yep. just replace the disc and caliper.
but the VRG disc and caliper u got is 4 lugs or 5 lugs?
if 5 lugs, then u kena tebuk la ur Perdana hub..
anyway, mane dapat? berapa?

 

[sElAmAt]

VRG 5 lugs (front n rear), 1k is it pricey

 

[NeuroOne]

if get front and rear, 1k is ok la.

 

[LowKey2677]

Any modifications needed if i were to fit a complete FTO brake set to a 1.5 wira? Im planning to change from 4x100 to 5x114.3. Any idea of whats the best way to go?

 

[DanzEterna]

use evo twin pot calipers then tebuk yr hubs to 114.3 x 5

 

[LowKey2677]

Danz, the reason im thinking of changing to FTO brakes is because its 5x114.3. I have a set of wheels that i would like to fit which is 5x114.3. Whats the cheapest way of converting to 5 lugs? If tebuk lobang also need to change the knuckle rite.

 

[l2s_turbo]

Knuckle no need to change..

 

[GRexer]

LowKey2677, if Wira to FTO, just swap the whole set, front inclusive of knuckle, rear inclusive of lower arm, plug and play.

 

[LowKey2677]

Would there be any fittament issue after changing to FTO brakes? Read somewhere that someone changed to FTO setup and his wheels are sticking out from the fender due to bigger calipers. What are the PRO n CONs if i tebok lobang VS changing to FTO brakes?

Thank you, in advance, for all your assistance in this matter.

 

[DanzEterna]

of course changing to FTO knuckle itself is better than tebuk the hub, as human error might occur sometimes,
if the holes are not accurate u may face rims not fitting properly or wobbling.

 

[LowKey2677]

Can i still fit a 15" wheel after changing to FTO disc brakes or minimum is 16"?

 

[^pomen_GTR^]

some design of 15" rim wouldn't fit....so in general i would say minimum is 16" rim....

 

[DanzEterna]

15" japan with 7/8JJ would fit.

 

[LowKey2677]

Thanks for the advice guys

 

[blupblup]

Hallo guys..someone call tell me where can i get that xxr527 17"?
Im from melaka..

 

[DanzEterna]

ive seen the seller before, somewhere in sgor...but forgot his name......
will inform u if i seen him around in mudah.my.

 

[cpmah]

Hi sifu here,

I am looking for 5 hole knuckle (REAR) for Perdana, anybody here know which model of car should I get (for PnP into Perdana)?

TQ!

 

[NeuroOne]

Hi sifu here,

I am looking for 5 hole knuckle (REAR) for Perdana, anybody here know which model of car should I get (for PnP into Perdana)?

TQ!

i guess the hub from FWD galant or eterna.
dont get it from 4WD, the hub wont fit.

 

[cpmah]

i guess the hub from FWD galant or eterna.
dont get it from 4WD, the hub wont fit.

The FWD version of eterna or galant got 5 X 114 model?

 

[NeuroOne]

The FWD version of eterna or galant got 5 X 114 model?

well, i'm not sure about that.
coz before this, i only get the 5x114 hub from a 4WD galant which do not fit the rear.
in the end, i tebuk the rear hub to be 5x114..