injector connector question

[H22-C]

i bought Sard injector 800cc, but the connector type is different from original.

after some search, i think the Sard 800cc using Nippon Denso connector (oval), and the original connector is Bosch type EV1 (square).

my Sard injector come with female connector.

i need to find the male connector for EV1, where can i find it ?

http://i241.photobucket.com/albums/ff55/boonewe/inj1.jpg

http://i241.photobucket.com/albums/ff55/boonewe/CONN-75571-mod.jpg

 

[evokit]

hi, h22-c, you just need to cut two lines on both side of the injector on top there on hte green color area ok. very easy, any help let me know.

 

[azizi.aziz]

Ah kit...Just like my case isn't it...hehehe

 

[H22-C]

evokit, is it correct ?

aziz, mind to share if you already have taken pic in your pc....

http://i241.photobucket.com/albums/ff55/boonewe/inj1a.jpg

 

[evokit]

need to cut on the outer part where you can see two lining on both side

 

[H22-C]

many thanks evokit, you mean cut away this one right ?

http://i241.photobucket.com/albums/ff55/boonewe/inj800.jpg

then the original metal clip can still lock it ?
if not, i afraid the connector can get loosen itself due to engine vibration.

 

[evokit]

ya thats the right way to cut and no need to use the metal clip already because you are using different socket and the sard socket have the safety lock on itself

 

[H22-C]

many many many thanks to evokit. i will try to fix it.

 

[-sky-]

great info that was shared here.....

this y i love being one of the forum reader in ZTH.