High Performance Camshafts

[patrickgun]

im interested in the powerzone high cams..can you pls pm me the price ?.
another question. what duration suits my siemens ecu ? im driving a 4G13P siemens..
serious buyer

 

[neoblitz]

Enquire for Gen2 Street Cam

Dear Powerzone,

I need some advise and possible a fair price for a pair of PZ Street Cam. According to your ad in Hypertune, we should see an increase of 20-25% in power after installation.

1) How do you derive the power gain? From the original stock HP or from my current set up HP?

2) My Gen2 current Mods:
- Hotbits 4-2-1 Full Exhaust Systems
- Volker Platinum Spark Plugs
- Hotbits Adjustable Cam Pulley
- K&N Drop in Airfilter
- Mythelogy Crank Pulley
- Pivot Red Spark Stabilizer & Blue Voltage Stabilizer

For everyone's info, it is now at 124.7HP. Well, it's quite a different from my first Dyno of 103.7HP at stocks

Now for the Street Cams, if it provides half the power (12.5%) you advertised, my Gen2 should end up with 140.3HP. This is SERIOUS SH*T man! :shades_smile:

This is 15 HP increase after installing your product which in my case, took me quite a few mods to get it. Is this really possible?

3) After instaling the StreetCams, is the engine/exhaust sound going to be louder than before?

4) Most likely the fuel consumption is going to higher right? But would it be 20-25% as well?

5) Finally, how much would it cost for the Streetcams and Installation?

6) How long would it take to install and would it be exchange cam deal as well?

7) Do I need to send my car for retuning after the installation? Er...dunno whether Campro can tune or not.

Sorry if I ask too much but I'm very interested in your products. Hope to get this for my own Christmas present..:angel_smile:

Thanks

 

[InitialD]

May I know the following:

1) How much for Satria GTi?
2) Takes how long to install? Can do in one day?

 

[jombiee]

Are NS Performance still exist ?

 

[ethanphoon592]

For everyone's info, it is now at 124.7HP. Well, it's quite a different from my first Dyno of 103.7HP at stocks

Dear Neoblitz,

May i know where you dyno your car? which shop is this?

 

[Green06]

PowerZone Hi Perf Camshaft for Toyota 3SGTE (MR2)

How much for Toyota 3SGTE (MR2 Turbo)? 91/92 model.
How much of power gain? at what RPM range?
What is the cam profile? Can do combo? eg. 270 inlet 264 exh? or vice versa? Which is better combo? :regular_smile:
On exchange basis? Including workmanship?
Thanks

 

[neoblitz]

Dear Neoblitz,

May i know where you dyno your car? which shop is this?

WOw! I never thought anyone would still come here to post a note as I thought PZ is not active anymore.

Anyway, I dyno at Speedworks at PJ.

What car you driving, ethanphoon592?

 

[nik79]

can u give me the price for adjustable cam pulley for campro 1.3

 

[maxwsq]

Hi Powerzone....i need to check with you on something...
MyRide is a WIRA SE 4G15.
i have a minor modification on my exhaust (HKS) & Airfilter (K&N). if i were to install below items, will it helps alot?
ITEM
-CAM SHAFT (SOHC)
-Tune Length Extractor
-Air Intake Manifold
-Quick Shaft Gear Lever Kit
-4G15 Stroker Kit (1600 cc)
-Reinforced Engine Mounting
-Supercharger Kit with charged cooler system
i wanted to find out the price of each above said items for my WIRA 4G15. please let me know by emailing to [email protected]. thanks alot.

SQ WONG

 

[aminnorrashid]

i`am using 4G63T RVR Engine (manual).

what the cam degree that suitable for my engine.
lastly how much cost with the installation.
PLss.. serious buyer

 

[traize]

hi, anything for 4g54 engine? 8valve

 

[WAJA_HKS]

hi powerzone ....recently i bought a extractor 4-2-1 from ur company.... if i just plug the extractor to my waja and the other stuff like the piping and the muffler were left untouched ... would the perfomance be worse and the fuel consumption will get increased ?

Bump: hi powerzone ....recently i bought a extractor 4-2-1 from ur company.... if i just plug the extractor to my waja and the other stuff like the piping and the muffler were left untouched ... would the perfomance be worse and the fuel consumption will get increased ?

 

[Doniex]

hey guys...do u know where i can find 7A-FE parts (camshaft,valve springs,conrods,retainers
)??

 

[zahir_zahari]

what's the cost for high cam of 4g15p ? and need to change the rocker as well?what the degree of the cam?

 

[easymustard]

im planning to do some mod for my 2007 4g15 GLi wira at your store next month. how long will it takes and how much is the cost for :-
1. extractor + exhaust piping
2.adj.cam pulley
3.sohc camshaft
4.stroker kit
5.port and polish.

and i still not understand the blue printing.will i need it since my engine is still new.
i do check your website and catalog.is the price there is up to date?
hope for quick and serious response.

 

[Veloc]

Any cams for Toyota 2nd gen 4AFE (AE111)?

1. May I ask what duration?
2. Is it a set for both exhaust and intake or intake only?
3. Is it possible to order a certain duration camshaft instead of the ones you offer? Actually looking for something not so high like 260 deg only.
4. What is the price?