Gearbox evo 3 full lock LSD

gIGoN

Known Member
Senior Member
Jan 6, 2004
327
0
3,016
Hi there,

Need some advise on gear oil suitable for

1. evo 2-3 front full lock lsd
2. rear gearbox lsd
3. transfer box (not sure if this needs trans oil).

Could some sifu advise me what gear oil suitable for drag purposes for this setup. I just installed them and currently using the toyota lsd oil. My main concern would be the rear oil. Do we use the same oil as the front gearbox?
 

jinkl

4,000 RPM
Senior Member
May 22, 2004
4,624
376
3,183
Kuala Lumpur
Hi there,

Need some advise on gear oil suitable for

1. evo 2-3 front full lock lsd
2. rear gearbox lsd
3. transfer box (not sure if this needs trans oil).

Could some sifu advise me what gear oil suitable for drag purposes for this setup. I just installed them and currently using the toyota lsd oil. My main concern would be the rear oil. Do we use the same oil as the front gearbox?
Front Redline MT90
Rear Redline Heavy Weight shockproof can be used in center too
 

gIGoN

Known Member
Senior Member
Thread starter
Jan 6, 2004
327
0
3,016
I saw in some dsm/evo forums they mix mtl together with the mt90 for front gbox. Have you heard of something like this? or would u just recommend purely use mt90 for the front gbox.
 

Random Post Every 5 Minutes



Before I start - I'd like to highlight that what I'm going to discuss here today is considered basic NA engine modifications. I'm not going to go into the little hardcore mods, just only the most obvious and the most basic. If you start asking about the Power Linz or the Singh Groove, that means you're knowledgeable and shouldn't be reading this.

I'll talk about forced induction later since that...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience