Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="kktham" data-source="post: 672333" data-attributes="member: 9076">for all friends who intend to do an engine swap and worried about JPJ documentations, the following are some clues for what to expect:-1) go to your preferred half-cut shop and buy your engine. this engine MUST come with a Malaysian Custom approval (form K1) & original receipt for the engine issued by the half-cut shop.2) get the engine installed by your favourite mechanic. no hurry to send the car for Puspakom check, use it for a month, make sure that the engine is working fine before going thru all the JPJ hassles.3) bring your car to any Puspakom office (Cheras, Setapak & etc). Ask for a B2 Report (costs RM60.00). Allocate around 2 hours to get everything done, result to be released on same day.4) Inform your Car Finance about the intention to change engine. Say that your existing engine broke down. They will prepare you a letter of acknowledgement for the engine transplant. No payment is needed here.5) Bring all the above documents to your car insurance company to increase the for endorsement of the new engine or any engine capacity increase. You need to pay some money here for the cc increased as premium might go up. If same cc, very very minimal admin charges usually.5) Bring a photocopy & original of the Custom K1 form, engine receipt, Puspakom B2 report, FInance company acknowledgement letter (if still under finance), Car Registration card to the Putrajaya JPJ Office (Bahagian Teknik, Parcel D, Block D4, Level 2). The officer there will give you a form to fill up or you may download it from http://www.jpj.gov.my. YOU ONLY GIVE HIM PHOTOCOPY OF ALL THE ABOVE ONLY, ALL DOCUMENTS SUBMITTED ARE NON-RETURNABLE. no payment is needed over here. Usually takes 1 - 2 weeks for approval letter to be released. You have two option here, they either mail the approval letter to you or you go and collect yourself (call to check for status after . NO need to bring your car there.6) Last step, bring all the above (Custom K1, engine receipt, Puspakom B2, FInance Acknowledgement letter, Car Reg Card, JPJ Putrajaya Bah Teknik Approval Letter, Existing Road Tax disc, to either JPJ Wilayah (Setapak), JPJ Selangor (Padang Jawa). Be prepared to spend 2-3hours here. No need to bring the car. Goto 1st floor, ask for the Bah Tukar Engine, you will be given some forms to fill and queue for your turn. They will endorse the changes on your car reg card and JPJ's records. All these are done on the spot. Now, your new engine is 100% registered with JPJ Malaysia. 7) Proceed to the Road Tax counter to get a new road tax disc. (cc changed). need to add some money for the cc increased.DONE!!Whether you wanna get some runners to do it or do it yourself is up to you. I dun trust runners coz need to pass them your car & registration card. Dunno what they can do with all these informations.If your transplant is of same cc or less than 10% increase, no need to seek JPJ Putrajaya's approval. After transplant, inform insurance and finance, then bring your car to JPJ Wilayah or Selangor and get everything done on the same day. They have puspakom office at these 2 JPJ offices.GOOD LUCK!!cheers</blockquote>

Verification

The Marketplace Latest

original rare R-Pride Wado Sakura flower 15x5jj...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing TC4 17x8jj...
- Started by david tao
- Chassis and Wheels
BRAND NEW original rare Yokohama ADVAN Racing RG3...
- Started by david tao
- Chassis and Wheels
original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Advice needed from all sifu's..

Sifu's greetings!

A proud owner of Airtrek.. really... never regret even thou.. the old lady its aging..

ok sifus.. in need advice and very much appreciated..

hands gone itchy and did quite abit mods:-

2.3...

Opinion and personal experience with Liqui Moly's product

Hi guys...have anyone tried this product on ur tezza?is it good or just same as any engine oil product?any taiko here care to give some review...thanks in advance...:wavey:

altezza parts

ni guys...just wonder if u guys got extra pats for those items
1. full exhaust system for 3sge manual
2. air cond vent set (middle one)
tq... :driver: