Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Veloc" data-source="post: 4439172" data-attributes="member: 92511">I replaced 3 PCV valve this month and the latest one broke recently. So I ordered one form japan this time.I went back to the shop and ask for refund but they said that it is not their quality problem. They even said that it is my own improper installation or my engine is already very bad condition. anyone faced this problem? PCV valve keep breaking/malfunctioning. Please share.My story is as follows:I drive a 13 years old Corolla AE111, 4AFE Auto. The original PCV valve has aged and affects the idling. So I went to this stupid shop and bought one. Wasn't cheap. RM48.50 discounted to RM30.00. I even told them I wanted good ones. Not cheap ones. After installing first one, I check it the next day. Once I move it a bit, it broke. I understand that this valve is fitted very tightly and any mnovement has to be done very carefully or else it will break. But I barely even moved this!Fine... Went back to the shop and they insisted that it was my mistake. Even if it were a day. Bought the second one. Second one malfunction after one week and made the idle unstable. Went back to the shop and asked for replacement. They guy said okay. He asked me to remoev it form ym car are bring it back to the shop for replacement. I suspect that he was sure that the thing will break if it was moved. So it broke. When I took it to the shop, he said" Sorry you broke it, no replacement".bought the third one. Working fine... this time i never touched it again after installing. One fine day, it malfucntioned. SO I opened the hood to see. I just touched the thing and it broke off. Disintegrated! Barely even moved it! It seems that the plastic cannot withstand the heat and deteriorated. I went back and told the guy. I understand that PCV valve are fragile but shouldn;t be up to this level. This is problem with material quality... The boss said that this is my problem. wth???SO this time I went to UMW and ordered one form japan. Toyota's original. Cost only RM40.00!!! Just RM10.00 extra.By the way, the brand is Fujita and the shop's name is... Not sure if it is okay to reveal in forum? Is it okay? Any moderator? The shop is in Kota Kinabalu, Sabah.And I want to ask does anyone have the same problem with this "Fujita" brand? It says from japan and the shop insist this is not cheap brand.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Body kits for 350z

Hi, does anyone knew where can get the body kits for 350z in M'sia? Thks :adore:

lower spring for fd3s??

hi guys... any lower spring for fd3s... wat's the price like?? should be more comfortable than adjustable right??

For Sale : Nokia N96 16GB : â‚¬250 euro

Name & Registered Office:
MARKETING COMMUNICATIONS MANAGEMENT LIMITED
215 MARSH ROAD
PINNER
MIDDLESEX HA5 5NE
UNITED KINGDOM
(Marketing Manager)
Michael Romeo
TEL:+447024099860
FAX:+447024099860
Email...