bout proton pcd...

[SkYwAlKeR]

but i heard 8 holes weaker that only 4 holes..true?

not weaker or not problem lar... if u driving the old saga, u'll have to use spacer for the front hub if u wanna use 8 hole (2 PCD) rim... this is the reason why...

http://aycu24.webshots.com/image/42623/2000849271328211288_rs.jpg

the spacer is to provide a flat surface for ur rim to sit on... without it, ur wheel will vibrate at high speed...

 

[Maxx]

not weaker or not problem lar... if u driving the old saga, u'll have to use spacer for the front hub if u wanna use 8 hole (2 PCD) rim... this is the reason why...

http://aycu24.webshots.com/image/42623/2000849271328211288_rs.jpg

the spacer is to provide a flat surface for ur rim to sit on... without it, ur wheel will vibrate at high speed...

i think the spacer more to give "clearance" for multi pcd/hole rims, as the 4 stud make the rims cant properly attach to hub.

the other thing to reduce vibration is to use "center cone" at the hub if the rims center bore is bigger than the hub.

if the rims ngam2 fit the hub it is call hubcentric.
if not ngam then its lugcentric.

hubcentric can give more center placement of rims.
*i've read it somewhere. forgot the link thou.

 

[genny]

wau....cant really understand at all.....
hope can learn more bout it........

 

[SkYwAlKeR]

i also blur sial... what hugcentric lugcentric....

 

[Maxx]

heheh.. i try to search back where i read those.
well, its just some reading/knowledge that i found and wanted to share.