Accord Euro-R CL7 maintenance..

bien335

1,500 RPM
Senior Member
Aug 3, 2009
1,819
48
1,648
Johor Bahru
The wheel hopping happens when loses traction on 1st gear and when changing from 1st to 2nd instead of the wheels spinning they hop.
Wheel hop? you mean when you let the clutch go, the whole car shakes? same as mine. LSD gigit ka? because no wheelspin at all, just hop hoip hop
 

snake_man

Junior Member
Aug 23, 2010
5
0
501
Auckland
Thank you bro.

The wheels do spin out not smoothly/continuously but kind of intermittently.
This happens when the front wheels lose traction. i.e. accelerating fast from zero in wet conditions when the car is stationary.
If i put my foot down on the accelerator the whole front shakes violently while the wheels spin out.

I took the car to honda for a full service check. Everything seemed ok but this turns out to be a common issue with most powerful front wheel drive vehicles. There is no real way to fix it but allot of people that fit racing suspensions have suggested this helps reduce the shake during take offs.
 

jdm_jdm

Known Member
Senior Member
Feb 24, 2009
121
16
1,518
Penang
Thank you bro.

The wheels do spin out not smoothly/continuously but kind of intermittently.
This happens when the front wheels lose traction. i.e. accelerating fast from zero in wet conditions when the car is stationary.
If i put my foot down on the accelerator the whole front shakes violently while the wheels spin out.

I took the car to honda for a full service check. Everything seemed ok but this turns out to be a common issue with most powerful front wheel drive vehicles. There is no real way to fix it but allot of people that fit racing suspensions have suggested this helps reduce the shake during take offs.
"most powerful front wheel drive vehicles" :adore:
 

fairy

500 RPM
Senior Member
Aug 24, 2007
644
1
1,518
abang bien, my 1 wheel spin, and wheel hop like mad... bunyi chitchitchitchitchitchit... sigh..
 

Cavey

Known Member
Senior Member
Jul 18, 2005
213
0
1,516
Msia
Hi bros.Im dekitting my ride.So im selling my 2 year old tein flex hi lo soft hard with my rear camber kit for 2600 nego.No leaks or noise.My car is also for sale but i want to sell it sumtime in november or december.2003/2007 euro r cl7 milano red with civic fd2r gunmetal ori rims 18 inch.The rest is stock standard.Pm if interested.No lowballers please.Thanks
 

jdm_jdm

Known Member
Senior Member
Feb 24, 2009
121
16
1,518
Penang
My cousin is spraying his CL7, which color you think is the best?
1) latest camry pearl white
2) Myvi pearl white ( a bit goldlish, like type r champ white )
3) Type R Championship white
4) Honda Stream Pearl white

Thxn :adore::adore::adore:
 

fardy

Junior Member
Senior Member
Mar 24, 2010
17
1
1,503
Kuala Lumpur
My cousin is spraying his CL7, which color you think is the best?
1) latest camry pearl white
2) Myvi pearl white ( a bit goldlish, like type r champ white )
3) Type R Championship white
4) Honda Stream Pearl white

Thxn :adore::adore::adore:
yellow spoon..quite adorable..hehe
:driver:

btw,
what code does this car's battery compatible with?
----------------------------------------------------
already found..46B24L
:driver:
 
Last edited:

jdm_jdm

Known Member
Senior Member
Feb 24, 2009
121
16
1,518
Penang
Yellow spoon is nice but the yellow abit too heavy, for yellow i still think the BMW E36 M3 Dakar Yellow is the best!
 

fairy

500 RPM
Senior Member
Aug 24, 2007
644
1
1,518
i thought the camry was crystal white??
 

Cavey

Known Member
Senior Member
Jul 18, 2005
213
0
1,516
Msia
Hi bros.My car pics are posted in cars for sale section.Tein flex for cl7 and unichip Q still up for sale.
 

aja

4,000 RPM
Senior Member
Dec 3, 2003
4,696
35
5,148

jdm_jdm

Known Member
Senior Member
Feb 24, 2009
121
16
1,518
Penang
Anyone knows what is the part number for the CL7 steering tie rod? The CL7 is using Electronic Power Steering (EPS), could that be possible that the local FD Civic 2.0 EPS tie rod is same as CL7 tie rod?

---------- Post added at 12:12 PM ---------- 6 hour anti-bump limit - Previous post was at 12:08 PM ----------

Red color? Really nice one!. Your unit came with Mugen kits, together with the purchase? or you bought it separately?

Our Facebook group as below:

http://www.facebook.com/?ref=home#!/group.php?gid=350313842061

U could find one red color CL7R as well

There is an universal Euro R Facebook page in the Facebook :

http://www.facebook.com/?ref=home#!/group.php?gid=15496865730
This is ... i believe is spoon bumper. It is only looks nice on certain angle.
 

aja

4,000 RPM
Senior Member
Dec 3, 2003
4,696
35
5,148
Anyone knows what is the part number for the CL7 steering tie rod? The CL7 is using Electronic Power Steering (EPS), could that be possible that the local FD Civic 2.0 EPS tie rod is same as CL7 tie rod?

---------- Post added at 12:12 PM ---------- 6 hour anti-bump limit - Previous post was at 12:08 PM ----------



This is ... i believe is spoon bumper. It is only looks nice on certain angle.
Should be similar to local Accord CM5
 

electro16

Active Member
Senior Member
Jan 10, 2009
26
1
1,503
Hi bros, I'm selling my car so need to dekit every aftermarket parts that I hv. The parts are,
Brian Crower stg 2 camshaft (BC0042 / 304^), Skunk2 dual valvespring, aftermarket ignition amplifier, j's racing induction kit (carbon fiber), super90 throttle body (70mm) with port match intake, Honda RDX 410cc injector.
Exhaust: Toda header/extractor, 3" custom piping all da way with 1 resonator/silencer & dual outlet no muffler (seriously loud).*
Transmition/Gearbox: stock/standard 6 speed manual with Exedy Hyper Single clutch kit, spoon 5.062 final drive & TSX long ratio 6th gear.
Handling: Toda fightex fully adjustable suspension (high/low, soft/hard & pre load adjustment).
Break: Alcon 4 pot caliper with Alcon radial mount bracket & 330mm Brembo floating disc.*
Electronic: HONDATA K-Pro with harness.

Some of the item need to discuss further like gearbox components. Pls contact me if interested.

---------- Post added at 07:09 PM ---------- 6 hour anti-bump limit - Previous post was at 06:59 PM ----------

Forgot to mention all parts mention above are for sale & taken frm CL7R. Tq
 

kUmUcHaI 11/1

500 RPM
Senior Member
Feb 28, 2010
536
106
1,543
39
JB - KL
bro.... let me know your hondata k pro and brake kit's price
super 90 throttle body's price
good luck for your sale
thanks

k pro for CL7R can?
 

AE111_SEG

1,000 RPM
Senior Member
May 18, 2005
1,024
180
3,163
Putra Heights
Guys
One of my buddies want to get a CL7R 2005 model unregistered.
The price is 135k. Is this reasonable?
Anything need to look out for?... mechanically...
Any common problem with this model.?
Will ron95 damage the engine.
Removing speedcut ...what is the commonly used brand.

Appreciate your advise...:biggrin:
 
Last edited:

aja

4,000 RPM
Senior Member
Dec 3, 2003
4,696
35
5,148
Guys
One of my buddies want to get a CL7R 2005 model unregistered.
1. The price is 135k. Is this reasonable?
2. Anything need to look out for?... mechanically...
3. Any common problem with this model.?
4. Will ron95 damage the engine.
5. Removing speedcut ...what is the commonly used brand.

Appreciate your advise...:biggrin:
Sian. No one wanna answer your Qs. hehehehe

The answers:

1. Cheap. make sure dont buy from AP Serawak. I heard many issues. Almost 95% of good CL7R came from Mutiara/Naza. Other 5% student AP lah.

2. No need. Just drive. Gearing ratio for CL7R = FD2R except for FD2R has bigger FD. (lazy Honda!)

3. No

4. No. Running 80% well on Ron95 extra. still can tapaued some Turbo cars outside there, or even similar K20AR. U will loose about 1 car if u do a sprint test between two CL7R with ron97 on the other car. Best performed on ron97.

5. Remove speed cut? No need la. Dangerous..:smokin::smokin:
 

sousuke

Known Member
Senior Member
Dec 9, 2004
251
0
3,016
Sian. No one wanna answer your Qs. hehehehe

The answers:

1. Cheap. make sure dont buy from AP Serawak. I heard many issues. Almost 95% of good CL7R came from Mutiara/Naza. Other 5% student AP lah.

2. No need. Just drive. Gearing ratio for CL7R = FD2R except for FD2R has bigger FD. (lazy Honda!)

3. No

4. No. Running 80% well on Ron95 extra. still can tapaued some Turbo cars outside there, or even similar K20AR. U will loose about 1 car if u do a sprint test between two CL7R with ron97 on the other car. Best performed on ron97.

5. Remove speed cut? No need la. Dangerous..:smokin::smokin:
sounds familiar....lol:banghead:
 

aja

4,000 RPM
Senior Member
Dec 3, 2003
4,696
35
5,148
Guys
One of my buddies want to get a CL7R 2005 model unregistered.
The price is 135k. Is this reasonable?
Anything need to look out for?... mechanically...
Any common problem with this model.?
Will ron95 damage the engine.
Removing speedcut ...what is the commonly used brand.

Appreciate your advise...:biggrin:
sounds familiar....lol:banghead:
kehkehkeh. As long as u save RM2.80 - RM1.90 = RM0.90/litre or RM54 per every refueling full tank of 60L, that consider superb dah!! kikikiki
 

Random Post Every 5 Minutes



The new Honda Civic Euro will be released soon and will feature a new four-cylinder diesel engine for the UK market. The new engine will be more efficient and greener than the previous generation engines.

The 2.2L i-DTEC produces 148-hp and a reasonable 349 Nm of torques. Thanks to an updated version of Honda’s i-DTEC valvetrain system, these figures are achievable...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience