Proton 4G13/4G15....Satria/Wira/Saga

[khguan]

tofu,
alrite.. just got the GTi piping installed.. extended the piping about 4" longer to fit into my car. The catcon position replaced with a plug n play midbox.

Compared to my rojak WiSE mandrel piping... this new setup is more quiet than the previous one. The sound is exactly like stock standard even when revved hard. I like that! Power delivery is smoother and slightly more powerful.

Later will plan to do thermal wrap for the entire piping.

 

[magoo24]

hye guys....
i just got a 10 years old wira 4g13.so im planning to upgrade it slowly.
my fren sugest to change the extractor 1st.which extractor is suitable for my engine..
other suggestion for me to start?

 

[tofu_manic]

tofu,
alrite.. just got the GTi piping installed.. extended the piping about 4" longer to fit into my car. The catcon position replaced with a plug n play midbox.

Compared to my rojak WiSE mandrel piping... this new setup is more quiet than the previous one. The sound is exactly like stock standard even when revved hard. I like that! Power delivery is smoother and slightly more powerful.

Later will plan to do thermal wrap for the entire piping.

hehe this one really undercover 'stocknia'

wats next? methanol-water injection? hehe dat would be nice

hye guys....
i just got a 10 years old wira 4g13.so im planning to upgrade it slowly.
my fren sugest to change the extractor 1st.which extractor is suitable for my engine..
other suggestion for me to start?

fuel price go down a bit straightaway decide to upgrade liao ar LoL just kidding hehehe

go with the more familiar brand names, like zenden, hotbits, and the more expensive one, powerzone, almost rm 400, the other 2 i cant remember

Cheers! Do hapdet once uve got it installed

 

[craziqbal]

where to find the zenden extractor? kent20 is not selling it anymore..

 

[magoo24]

is 4-2-1 extractor ok?

 

[GT_AUTO]

4-2-1 is good for street use.if i'm not mistaken hotbits price increase liow.
btw,i've seen powerzone extractor before at eneos.ihmo,it's not that good.
all powerzone extractor r crush bend.don't shoot me pls those p/z kaki.

 

[hAz]

4-2-1 is good for street use.if i'm not mistaken hotbits price increase liow.
btw,i've seen powerzone extractor before at eneos.ihmo,it's not that good.
all powerzone extractor r crush bend.don't shoot me pls those p/z kaki.

bro, wat do u mean by good for street use?
newbie here

 

[craziqbal]

he means good for everyday use as the 4-2-1 extractor is more suited for low-mid rev range while the 4-1 is more to higher revs..btol ka sifoo? I'm also learning..

 

[magoo24]

owh like that.so im going for 4-2-1..
what about diameter for my 4g13?

 

[highbeam]

if u wanna change 4 2 1 make sure it branded stuff etc hotbits or powerzone extactor
becoz others cap ayam are suck!!increase fc n one more cap ayam dont give the power that u want.trust me!!!

 

[tofu_manic]

he means good for everyday use as the 4-2-1 extractor is more suited for low-mid rev range while the 4-1 is more to higher revs..btol ka sifoo? I'm also learning..

yap generally it is like this, generally 4-2-1 has a broader useable powerband, compared to the 4-1

owh like that.so im going for 4-2-1..
what about diameter for my 4g13?

u mean exhaust piping? 1.6 to 1.7 inches should be fine

4-2-1 is good for street use.if i'm not mistaken hotbits price increase liow.
btw,i've seen powerzone extractor before at eneos.ihmo,it's not that good.
all powerzone extractor r crush bend.don't shoot me pls those p/z kaki.

yap it is crush bent, the newer batch are mandrel bent though, they havent officially advertised the newer version for the 4g13/15

 

[khguan]

tofu,
WMI?? nah.. not worth the money for NA car... if got turbo then it is worth the money as u can see better performance increment...

next would be electronics... most probably E-Manage next year... this year broke already.. hhehe..

i'm enjoying my "stock" car rite now.. hehe

 

[GT_AUTO]

bro, wat do u mean by good for street use?
newbie here

check out craziqbal post.

he means good for everyday use as the 4-2-1 extractor is more suited for low-mid rev range while the 4-1 is more to higher revs..btol ka sifoo? I'm also learning..

yup...ur right bro and no,i'm not sifoo...hehehe.still learning too.

if u wanna change 4 2 1 make sure it branded stuff etc hotbits or powerzone extactor
becoz others cap ayam are suck!!increase fc n one more cap ayam dont give the power that u want.trust me!!!

learn from experience i see.hehehe.....yup,don't buy those crap cheap extractor.
it will rob ur horsie.

yap it is crush bent, the newer batch are mandrel bent though, they havent officially advertised the newer version for the 4g13/15

opsss....really?sorry i haven't seen the new 1 yet.

 

[tofu_manic]

tofu,
WMI?? nah.. not worth the money for NA car... if got turbo then it is worth the money as u can see better performance increment...

next would be electronics... most probably E-Manage next year... this year broke already.. hhehe..

i'm enjoying my "stock" car rite now.. hehe

broke ar...haha wat to do...at least got 'stock' car to play with

seeing u all playing with fuel regulators, ecus, etc. etc., im really tempted to go the 'efi' route...hmmm....but may not be with the 4g15...hmm see lah, all depends on budget

opsss....really?sorry i haven't seen the new 1 yet.

lol wat sorry sorry :P

powerzone has not officially announced or advertised their new headers, dont even know whether their other outlets (other than the one at glenmarie) are stocking the new ones

 

[khguan]

bro tofu u wanto go EFI ah?? erm.. i dun think worth the money kua.. since u already done up so much to ur engine already...

 

[tofu_manic]

bro tofu u wanto go EFI ah?? erm.. i dun think worth the money kua.. since u already done up so much to ur engine already...

yea troo troo...if lottery strike, then mebbe venture the efi way with another ride? kekekekeeke

head gasket busted! head gasket busted! intake manifold leaking! intake manifold leaking!

sien! boring! bosan! $%%^@%%@^

hmm...carburettor no rev cut mah hehe wat to do....$$$ flying again

 

[khguan]

erm.. changing the head gasket wont cost much for 4g15 mah.... if u DIY.. even much cheaper...

 

[tofu_manic]

erm.. changing the head gasket wont cost much for 4g15 mah.... if u DIY.. even much cheaper...

i didnt mention...pc kong-ing out too....laptop also likes to go bluescreen on me...

so can say...fall down, then whacked by ladder...

diy time consuming and cant do alone without supervision, scared i place the head in the boot and car cant start, how?

 

[kkchai]

Hi... I am still kind new here. I hope to meet you all people out there go "cari-makan", drive and have fun.

Those who have experience mind to share your DIY and since tofu_manic also need help to reduce his burn in his wallet, can anyone kind to host it??

Personally I also hope to learn from everyone here.

Thanks.

 

[tofu_manic]

Hi... I am still kind new here. I hope to meet you all people out there go "cari-makan", drive and have fun.

Those who have experience mind to share your DIY and since tofu_manic also need help to reduce his burn in his wallet, can anyone kind to host it??

Personally I also hope to learn from everyone here.

Thanks.

Hallo welcome to the forum! :wavey:Wish could join cari-makan with u fellas but cant, due to my location on the land of the hornbill...

lol yeah, need help definitely, hope i pull through this month without something else kong-ing out