something must be in the way,... say,... the headlite washer tupperware head (if leftside),... remove that, then ur hand easy to enter that compartment.I know this might sound funny, but I had a tough time trying to get to the bulb in order to replace it! to reach for the main headlamp & small bulb is no problem, but it really driven me nuts how to reach the signal bulb...
in my case, it's the left side. had removed the headlite washer tupperware head, but still can't get a proper reach to the signal bulb compartmentsomething must be in the way,... say,... the headlite washer tupperware head (if leftside),... remove that, then ur hand easy to enter that compartment.
if the other side,... some small things can be removed.
just open 2 plastic clips, then put ur hand inside... feel the socket, then turn it anti-clock. the wire r q long, so no worry that can pull it out..i c...so juz hafta pop open the plastic inner finder to expose the bulb's area right?
just open 2 plastic clips, then put ur hand inside... feel the socket, then turn it anti-clock. the wire r q long, so no worry that can pull it out..
easy..??
hehehhee... after put 2 ball inside, u dun need to use meh..?put two bulbs inside,... one as spare
thanks 4 the help. will try it after office when back at home :wavey:just open 2 plastic clips, then put ur hand inside... feel the socket, then turn it anti-clock. the wire r q long, so no worry that can pull it out..
easy..??
put 2 bulbs...hahahahaput two bulbs inside,... one as spare
You sound like replacing the bulbs is a pain in the ass.....something must be in the way,... say,... the headlite washer tupperware head (if leftside),... remove that, then ur hand easy to enter that compartment.
if the other side,... some small things can be removed.
Basically what jin said, but I have never replaced this bulb before coz it's pretty durable.just open 2 plastic clips, then put ur hand inside... feel the socket, then turn it anti-clock. the wire r q long, so no worry that can pull it out..
easy..??
follow my instruction... sure good 1...thanks 4 the help. will try it after office when back at home :wavey:
put 2 bulbs...hahahaha
good news guys - the bulb has been replaced successfully! exactly like jin said, pop open 'em inner fender clips 2 expose the bulb area. the whole thing took me 1/2 hour - getting the bulb out, going 2 the spare parts shop 2 buy the replacement bulb & install it where it belongs.follow my instruction... sure good 1...
Make sure you replaced it with quality bulbs like Philips or Osram, those cheap one don't work.good news guys - the bulb has been replaced successfully! exactly like jin said, pop open 'em inner fender clips 2 expose the bulb area. the whole thing took me 1/2 hour - getting the bulb out, going 2 the spare parts shop 2 buy the replacement bulb & install it where it belongs.
felt good after the job done...thanks ppl! :wavey: