SATRIA 1.6 - Seeking advices for TUNING & UPGRADES

[#OGPIM]

by satria you mean proton & mitsubishi?
you can try my mech at Jalan Bukit Kemuning, Shah Alam if it's near your place. Waze Upwork Racing Workshop or Bengkel Kereta RF Auto Service.

Now its confusing.
Satria & Mitsubishi?

 

[vr2turbo]

For the rims, that's definitely a caliper problem. Just go do caliper/brake kit service. Not that expensive. Less than RM150 for both front wheels. The brake kit comes in a set of 2.

Check first what is wrong. If piston jam then need the kit for service. If pin jam just need to clean and grease back....

 

[#OGPIM]

Check first what is wrong. If piston jam then need the kit for service. If pin jam just need to clean and grease back....

Boleh bro
Sending next week to the garage

 

[#OGPIM]

YO Senpai...

Any suggestion for Bucket Seat?
Got some mates told me that China does produced some reliable seats.

 

[RENESIS VIII]

YO Senpai...

Any suggestion for Bucket Seat?
Got some mates told me that China does produced some reliable seats.

How about getting from halfcut? Used but at least is from a reputable brand.

 

[drummydrew]

YO Senpai...

Any suggestion for Bucket Seat?
Got some mates told me that China does produced some reliable seats.

brand new or used?

 

[#OGPIM]

brand new or used?

China brands i dont mind.
Used half cut i also dont mind...

 

[#OGPIM]

How about getting from halfcut? Used but at least is from a reputable brand.

I checked a few used unit. Its ciplak.

 

[vr2turbo]

China brands i dont mind.
Used half cut i also dont mind...

Heard from some members, non branded ones the built is quite bad.....:hmmmm:

 

[RENESIS VIII]

I checked a few used unit. Its ciplak.

Recaro from Evo 3? But that seems to be quite expensive...

Or those Recaro SR3 or SR4 from Honda Type R cars.

 

[vr2turbo]

Recaro from Evo 3? But that seems to be quite expensive...

Or those Recaro SR3 or SR4 from Honda Type R cars.

Good is expensive loh! Buy ciplak ones sure will regret later......

 

[RENESIS VIII]

Good is expensive loh! Buy ciplak ones sure will regret later......

Price of Mitsubishi halfcut items are just overpriced in my opinion. These 20 year old used Evo 3 Recaro can cost like RM2000 for a pair. Because of high demand I guess.


If you compare with similar seats from Impreza WRX STI, they cost less than this. Unless it is those special seats from special version STI.

 

[#OGPIM]

Hi Senpai

I have one nerdy technical question:

The Throttle Body, whats the ideal tweaking?

I tweaked it to RPM1100( when air con is on ) ,its about RPM2100( when air con is off ).

Does it effect the performance?
I noticed that its quite noisy & the "checked engine signal " popped up few times?

 

[sweelt]

What engine? Sorry....I don know lah

 

[RENESIS VIII]

What engine? Sorry....I don know lah

Since he mentioned at the start of the thread, Satria 1.6 stock, means should be 4G92P.

 

[vr2turbo]

Hi Senpai

I have one nerdy technical question:

The Throttle Body, whats the ideal tweaking?

I tweaked it to RPM1100( when air con is on ) ,its about RPM2100( when air con is off ).

Does it effect the performance?
I noticed that its quite noisy & the "checked engine signal " popped up few times?

Then the FICD is not working......

 

[sweelt]

Since he mentioned at the start of the thread, Satria 1.6 stock, means should be 4G92P.

http://www.zerotohundred.com/newforums/showthread.php?t=439774

check tps, isc .... patient don rush

 

[sanekit]

Hi Senpai

I have one nerdy technical question:

The Throttle Body, whats the ideal tweaking?

I tweaked it to RPM1100( when air con is on ) ,its about RPM2100( when air con is off ).

Does it effect the performance?
I noticed that its quite noisy & the "checked engine signal " popped up few times?

F1 idling bro.
Your car got FICD or not? If not, your ISC Valve rosak dy.

Then the FICD is not working......

I don't think he got FICD :hmmmm:

 

[#OGPIM]

Since he mentioned at the start of the thread, Satria 1.6 stock, means should be 4G92P.

Satria 4G92

 

[sweelt]

check isc. I think u playing with the bypass BISS screw to adjust rpm. if 92 have one.
Don play with biss screw. Is for fine tuned, not to set rpm.