owners club kancil..

[Dayline668]

hi.. Im looking for kancil used ori spring, any1 wanna sell me..?

 

[june5095]

hello friend , i want to ask if l2 n/a 660block oversize to 1.0 block , tat block tahan o not ? if i raise until 6000 to 7000 rpm ...

 

[SYeNi69]

hello friend , i want to ask if l2 n/a 660block oversize to 1.0 block , tat block tahan o not ? if i raise until 6000 to 7000 rpm ...

how u gonna oversize to 1.0 block ??? if u use the crank from kelisa and L2 conrods will be too long and ur piston with pop out of the block ...

my setup last time L2 head with kelisa block and 2E turbo piston .. boostin at 2.5 bar ... 2++whp ... i think the block tahan laa ... i shift at 8k rpm cause powerband drops at 8.5k ... not only me la using that block ... so many nowadays L2 using kelisa block ... :wavey:

 

[june5095]

how u gonna oversize to 1.0 block ??? if u use the crank from kelisa and L2 conrods will be too long and ur piston with pop out of the block ...

my setup last time L2 head with kelisa block and 2E turbo piston .. boostin at 2.5 bar ... 2++whp ... i think the block tahan laa ... i shift at 8k rpm cause powerband drops at 8.5k ... not only me la using that block ... so many nowadays L2 using kelisa block ... :wavey:

ya ... now my l2 is 1.0 just change kelisa piston only if not wrong,i think conrod n crank din change still using olriginal l2 one ..coz my dad change it ... he said more powerful ... but he said when the thermometer needle reach middle there , don raise liao ... tats y i want to know .. it's the l2 660 block oversize to 1.0 tahan o not .. and my l2 not turbo one is n/a still using carb l2 ... no money play turbo hehe ^^ and i have ask my dad , but he din answer me ...

 

[artworkz]

EF piston bore r 68mm, stroke 60.5mm. kelisa EJ piston bore 72mm stroke81mm. if use EJ piston wif EF crank, resulting 739cc. displacment upgrade 12%.

 

[Wah Chai]

guys,my foremen told me after they bought l2s halfcut from halfcut shop,install and i use 1st.after 1 month only can get the AP document .is it normally like that ?

 

[june5095]

how u gonna oversize to 1.0 block ??? if u use the crank from kelisa and L2 conrods will be too long and ur piston with pop out of the block ...

my setup last time L2 head with kelisa block and 2E turbo piston .. boostin at 2.5 bar ... 2++whp ... i think the block tahan laa ... i shift at 8k rpm cause powerband drops at 8.5k ... not only me la using that block ... so many nowadays L2 using kelisa block ... :wavey:

erm .. then if using kelisa block , can use back l2s gearbox or need to use kelisa gear box ?

 

[SYeNi69]

erm .. then if using kelisa block , can use back l2s gearbox or need to use kelisa gear box ?

yup can use L2 or any kancil gearbox ... if u want to use kelisa also can but must custom driveshaft

 

[Wah Chai]

guys,my foremen told me after they bought l2s halfcut from halfcut shop,install and i use 1st.after 1 month only can get the AP document .is it normally like that ?

somebody please help to answer my question

 

[DanzEterna]

when u buy the halfcut, they should have the AP in their hand ma...
u need the AP+K1(custom form)+reciept in order to register yr engine.

 

[Qft]

hi guys, my kancil using L5 turbo engne.. but i stiL feel tht my frenz L2s is more pwrful then mine.. how can i mke it more.. eemmmmh!! btw, im using EF-RL model.. im new here..

 

[zeus83]

hi guys anyone wanna sell their stock 850 engine??

 

[l200turbo]

buy things with jdm is ok la..buying halfcut there is a no...they will keep delaying ur custom form...an experienced from my friend who swap njin there....

 

[zul_klasik]

hai all
ermm
any1 out there have a xprience with kancil loco style theme or JDM style theme??
i'm newbies here
hope u can share knowledge with me
hehehe :wavey:

 

[jj.v6]

to all kancil owner..i just lost my rear spoiler mira moderno..those thief they know exactly how to take out.damn........so if u using any mira moderno parts pls be careful...any idea whr can find?my supplier in jb is out of stock...might take 1 month for new stock...thanx