Mitsubishi Turbo specifications.

[SDF]

t04b and t04e is a frame size...

most ppl measure diameter size from the inducer of the compessor wheel...the tip of the wheel where u can see... ;)

 

[tkk]

Originally posted by sum-dum-fuk@Mar 1 2005, 10:17
t04b and t04e is a frame size...

most ppl measure diameter size from the inducer of the compessor wheel...the tip of the wheel where u can see... ;)

is the T04B is old model?

what is the best inducer diameter for using in 1.8cc turbo?

 

[SDF]

tkk..

there's no right / wrong size to use...it all has to calculated and also depends on what u want.. ;)

 

[pathfinder]

confuse :huh: sdf....i think the new range of garrett gt series all apply ball bearing.right or wrong?

if at the turbo stated A/R.68 ....the 68 number refer to what? if 68,is this consider big turbo? what cfm and estimate bhp. help.

 

[SDF]

not all GT series are Ball Bearing...

GT is a new technology on design of each component in the Garrett series...

 

[tkk]

Originally posted by sum-dum-fuk@Mar 3 2005, 08:42
tkk..

there's no right / wrong size to use...it all has to calculated and also depends on what u want.. ;)

[snapback]784133[/snapback]​

thanks for your info. anywway i got a t04E turbo already.

 

[Act-4]

[tkk...your t04e is taken from what engine..?
if i take from rx-7 engine,can i use it into 4g63??

another question...what is differt betwen GT and t0XX series..??

Thank you... :D

 

[tkk]

Originally posted by Act-4@Mar 25 2005, 14:42
[tkk...your t04e is taken from what engine..?
if i take from rx-7 engine,can i use it into 4g63??

another question...what is differt betwen GT and t0XX series..??

Thank you... :D

[snapback]840105[/snapback]​

is a after market turbo. not from any car.

GT turbo is a ball bearing type. t0xx are normal bushing only

 

[TE27levin]

some more information i want to know..
sify pls answer..

1. what the different of T04B a/r 60 compressor housing and T04E a/r60 compressor housing? both come with same compressor wheel size.
hp rate same?

2. also the turbine housing. .48 T3 and .48 T4

 

[SDF]

tkk

GT does not mean all are ball bearing.

 

[lilvee]

Excuse me... i need some info from all turbo sifu here...

Is there any TD04.5 ? the size and performance is in between TD04 and TD05. if not mistaken, its from Mits Eclipse... Any info is highly appreciated... thanks

 

[SDF]

lv..

eclipses run a TD04... why do u wan an inbetween ?

 

[lilvee]

Originally posted by sum-dum-fuk@Mar 28 2005, 10:59
lv..

eclipses run a TD04... why do u wan an inbetween ?

[snapback]846294[/snapback]​

I heard its from UKDM Eclipses, not JDM which used TD04. btw, its spool faster (TD04) with great and laster G force (TD05). I can get both for my lil potato engine.

err... i go to GTauto last week, ur dyno is gone? :ph34r:

 

[SDF]

JDM specs use TD05..
US spec uses TD04.. ;)

dyno is next door... :D

 

[tkk]

Originally posted by sum-dum-fuk@Mar 28 2005, 08:33
tkk

GT does not mean all are ball bearing.

[snapback]845805[/snapback]​

got it brother... i still newbie mah for turbo hehehe :D