Hyundai Chop shop info thread

ABV9750

Known Member
Senior Member
Feb 13, 2005
322
0
3,016
if so then, look for mirage drive shaft set..i think it should fit well.
another option is to rework the inner CV. but in your case, turbo engine might kill it fast.
i dun think the inner cv would sound during cornering. normally it does during accelerate. you will notice a vibration..or crack.
anyway. let me check with my friends whether he has the item you want...which portion do you prefer? left or right? or both together? does the 1.6 will fit?
 

ketapang_inn

Known Member
Senior Member
Dec 15, 2004
77
0
3,006
well i never test with 1.6 so i dont know if it will fit...and i need to long one..dont remember left or right but its a long one for sure.

and thanks.
 

ABV9750

Known Member
Senior Member
Feb 13, 2005
322
0
3,016
hi, i'd just confirm with friend that the 1.6 elantra 2 is not match with your 1.8. may be you could check at Mits mirage stuff.
the best way is to dismantle it and try to match at kedai potong..
 

mieliki

Active Member
Senior Member
Sep 18, 2005
27
0
1,501
Bukit Jalil
I need some advice on where I can get a decent price for damage repair.. my car got hit in 2 different spots and I dunno where to get the repairs done..

Many thanks in advance for the help rendered..
 

BlackSamurai

9,000 RPM
Senior Member
Thread starter
Sep 2, 2004
9,656
24
3,138
near 7-11
www.hcc.ne1.net
mieliki, which part of the car get hit? normal chassis damage can be repair at any shop, but i believe the accident involves damage in car part, mind sharing?
 

mieliki

Active Member
Senior Member
Sep 18, 2005
27
0
1,501
Bukit Jalil
Hey Samurai,

The front passenger door and the backside of the driver back passenger side. Both were hit and run which most ppl who have seen the damage believe to be done by pajero or equivalent type. Dunno how it happen, but I left my car in Sri Petaling LRT station.. Went in the morning, came back in the evening kena.. 2 different spot on 2 consecutive days.. in different part of the parking lot..
 

nuwa

Known Member
Senior Member
Oct 17, 2006
64
0
1,506
hai guys, my friend looking for matrix rear door (halfcut) where should he go to?
 

Random Post Every 5 Minutes

Hi! All the Sifu! i want to ask your advise can i know how much will i cost if i bot in turbo
compare to i change my block to 4g93 and also if i change block already need to go jpj there?
by the way 4g93 block how much is the price now?
my currently is driving a proton satria 1.6
my engine full top is 4g93 parts onli below block havent change yet
gearbox is 1.8 one
can anyone advise me thanks so much
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience