Hyundai Chop shop info thread

ABV9750

Known Member
Senior Member
Feb 13, 2005
322
0
3,016
if so then, look for mirage drive shaft set..i think it should fit well.
another option is to rework the inner CV. but in your case, turbo engine might kill it fast.
i dun think the inner cv would sound during cornering. normally it does during accelerate. you will notice a vibration..or crack.
anyway. let me check with my friends whether he has the item you want...which portion do you prefer? left or right? or both together? does the 1.6 will fit?
 

ketapang_inn

Known Member
Senior Member
Dec 15, 2004
77
0
3,006
well i never test with 1.6 so i dont know if it will fit...and i need to long one..dont remember left or right but its a long one for sure.

and thanks.
 

ABV9750

Known Member
Senior Member
Feb 13, 2005
322
0
3,016
hi, i'd just confirm with friend that the 1.6 elantra 2 is not match with your 1.8. may be you could check at Mits mirage stuff.
the best way is to dismantle it and try to match at kedai potong..
 

mieliki

Active Member
Senior Member
Sep 18, 2005
27
0
1,501
Bukit Jalil
I need some advice on where I can get a decent price for damage repair.. my car got hit in 2 different spots and I dunno where to get the repairs done..

Many thanks in advance for the help rendered..
 

BlackSamurai

9,000 RPM
Senior Member
Thread starter
Sep 2, 2004
9,656
24
3,138
near 7-11
www.hcc.ne1.net
mieliki, which part of the car get hit? normal chassis damage can be repair at any shop, but i believe the accident involves damage in car part, mind sharing?
 

mieliki

Active Member
Senior Member
Sep 18, 2005
27
0
1,501
Bukit Jalil
Hey Samurai,

The front passenger door and the backside of the driver back passenger side. Both were hit and run which most ppl who have seen the damage believe to be done by pajero or equivalent type. Dunno how it happen, but I left my car in Sri Petaling LRT station.. Went in the morning, came back in the evening kena.. 2 different spot on 2 consecutive days.. in different part of the parking lot..
 

nuwa

Known Member
Senior Member
Oct 17, 2006
64
0
1,506
hai guys, my friend looking for matrix rear door (halfcut) where should he go to?
 

Random Post Every 5 Minutes

Xtreme Carbon Clutches

New to Xtreme Clutch is our range of Xtreme Carbon multiplate clutches. These are available in several twin or triple plate configurations for a variety of high performance vehicles.

Xtreme Carbon clutches come as complete matched assemblies including high performance flywheel. Bolts, fork, pivot ball, slave cylinder and all hoses and conversion fittings are supplied where necessary to ensure a hassle free, bolt in replacement package.

Xtreme Carbon...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience