H22A - Check Engine Light

jinggo84

Known Member
Senior Member

jinggo84

Known Member
Senior Member
Aug 2, 2006
199
1
1,518
check sensor connection...of course it will not blinking...sumtimes the wire socket is unplug with sensor in the engine bay...or other wise, ur sensor already out. last time 1 of my sensor i forgot to plug, the exhaust sensor, then it will turn on when reach certain speed...u need to plug in all the sensor...
 

bien335

1,500 RPM
Senior Member

bien335

1,500 RPM
Senior Member
Aug 3, 2009
1,819
48
1,648
Johor Bahru
Pull the code. it wont blink unless you make it blink.

Jump the blue socket, then count the blinks

then compare it to the CEL code list.

Bump: Pull the code. it wont blink unless you make it blink.

Jump the blue socket, then count the blinks

then compare it to the CEL code list.
 

E-Tech

Senior Member
Senior Member

E-Tech

Senior Member
Senior Member
Jun 28, 2005
1,115
256
3,183
Johor
blue little lorry.....lorry with h22A?

Anyway, as recommended, pull the code, and understand what the ecu trying to tell you.
At the same time, did you installed or tune your "lorry" before this happen?
 

Blue Little Lorry

500 RPM
Senior Member

Blue Little Lorry

500 RPM
Senior Member
Thread starter
May 10, 2006
572
17
1,518
Petaling Jaya
Blue Little Lorry was my previous car - My blue EG with all-round white bodykit =)
I just had an engine transplant to my sv4.....the engine check light does not light up all the time. It does sometimes when I hit around 160 KM/H at 4th gear .
 

tortis96

Known Member
Senior Member

tortis96

Known Member
Senior Member
Oct 27, 2004
96
0
3,006
i had this problem also.... but i detected my o2 sensor wiring... just send to a good mechanic and he will do the checking for u
 

AD_EG

6,000 RPM
Senior Member

AD_EG

6,000 RPM
Senior Member
Apr 5, 2009
6,330
231
1,663
Ipoh
go to a mech with a diagnostic tool...to retrieve what the error is..they will then check the book to see what the ecu is trying to say.