DIY - Cleaning Your Thorttle Body

[martinchan]

Hi There, I Had Discover How To Clean Our Thorttle Body By DIY

First Remove The screw Of The Air box

2 - Same Remove All The Screw

3 - Remove All The Joint And Socket, The Coil Of The Arrow Should Be Easly To Remore

4 - If The Coil Hard To Remove Then You Need To Remove This Two Nut 1st

5 - Same Remove The Socket

6 - Same Remove The Socket

7 - Romove This, But BECAREFUL Once Remove It will Leak Out The Coolent Water, It Maybe Hot Depand If Your Car Engine Still Hot, So, I Recommend You Do This Before You Start Your Engine In The Morning.

8 - Last, Remove This 3 Nut To Taken Out The Thorttle Body

9 - This Is How It Look Likes When You Take Out The Thorttle Body

10 - Dirty

11 - Clean It With Fuel Petrol With Clean Cloth And Gentle, Don't Scratch It

12 - This Is How It Look When Finish Clean It

So After That Just Screw Back All The Nut And Socket Then Reset The ECU And Start Your Engine To Wait It Self Learning, The RPM WIll Go High And Low , But It Is Normal During It Was Self Learning. So No Need To Worry.

 

[tengsh]

waaa........ martin goin to open workshop already...... anyway nice info

 

[martinchan]

hehe.. i wish to.. but no supporter....

 

[aycy]

Good job bro... thumb up....

 

[Bl@cK-TeZZ@]

so pandai ar.....

 

[TIE YOKE MING]

hahaha,good job,martin

 

[Northiswara]

how many hours u take to dismantle and clean then assemble it back?

 

[Northiswara]

how many hours u take to dismantle and clean then assemble it back?

 

[@lTEZZ@]

thanks for the info bro...

 

[martinchan]

Around 1 And 1/2 Hour

 

[lamer2000]

Bro,could you post the picture again for the DIY throttle Body Cleaning cause it got deleted.I am interested to DIY throttle body cleaning

 

[zahir_zahari]

Bro, do you know how to reset ecu for Wira SE.because i plan to clean my throttle body this weekend.Do we have to reset the ecu after cleaning the throttle body for Wira SE?

 

[ST56J]

Bro, do you know how to reset ecu for Wira SE.because i plan to clean my throttle body this weekend.Do we have to reset the ecu after cleaning the throttle body for Wira SE?

Can reset ecu for wira? wow.. malaysian technology is really picking up..

 

[jedi]

Hi There, I Had Discover How To Clean Our Thorttle Body By DIY

First Remove The screw Of The Air box

2 - Same Remove All The Screw

3 - Remove All The Joint And Socket, The Coil Of The Arrow Should Be Easly To Remore

4 - If The Coil Hard To Remove Then You Need To Remove This Two Nut 1st

5 - Same Remove The Socket

6 - Same Remove The Socket

7 - Romove This, But BECAREFUL Once Remove It will Leak Out The Coolent Water, It Maybe Hot Depand If Your Car Engine Still Hot, So, I Recommend You Do This Before You Start Your Engine In The Morning.

8 - Last, Remove This 3 Nut To Taken Out The Thorttle Body

9 - This Is How It Look Likes When You Take Out The Thorttle Body

10 - Dirty

11 - Clean It With Fuel Petrol With Clean Cloth And Gentle, Don't Scratch It

12 - This Is How It Look When Finish Clean It

So After That Just Screw Back All The Nut And Socket Then Reset The ECU And Start Your Engine To Wait It Self Learning, The RPM WIll Go High And Low , But It Is Normal During It Was Self Learning. So No Need To Worry.

hey bro

the photos are missing

mind checking it ? thanks a lot

 

[martinchan]

i'll post it up again.

 

[nickleesoo]

wah!!!!!!! martin now super famous man...... faster open shop, i will support you all the way bro.

Bump: wah!!!!!!! martin now super famous man...... faster open shop, i will support you all the way bro.

 

[martinchan]

hoi buddy!!! Long time no see huh??? when are coming to ipoh visit me again.. i got something for you !! hehehe..

 

[nickleesoo]

wah! martin kor kor.... u got what for me? i now in vietnam la. only come back every 2-3weeks. so, it's better you come down la and can yum cha with the 3 uncles [me included of course]. i bet you uncle yew and uncle teng sure agree one!

 

[Nuries]

if go to shop usually they said to replace the new throtle body that cos around 800 walau-eh

 

[jedi]

but some foreman touch the bottom part of the throttle body and says that the plastic or something like that was melting and this TB is dying.
they say its useless to replace the small gears or open & clean it.

i am not sure how true was it.