Detailing Session & hand on at Ampang Park automotive week

PocketRocket

'(00) Mod'er
Helmet Clan
Senior Member
Nov 28, 2004
11,164
953
3,213
Up Yours
thanks for all ur lessons kc, very valuable knowledge for the public to diy detail their own car, there's so much info to absorb that day and i wasnt there for full day. Really appreciate your enthusiasm for detailing!
 

kc2

1,000 RPM
Senior Member
Thread starter
Dec 2, 2009
1,354
1,410
1,713
Kuala Lumpur
thedetailers.blogspot.com
thanks for all ur lessons kc, very valuable knowledge for the public to diy detail their own car, there's so much info to absorb that day and i wasnt there for full day. Really appreciate your enthusiasm for detailing!
no prob buddy :wavey:

let me know


we will have another session .....

lets do it slowly & more in a close up , smaller group..that day the crowd was overwhelming:wavey:

:rolleyes: thanks for coming ya

---------- Post added at 04:32 PM ---------- 6 hour anti-bump limit - Previous post was at 04:25 PM ----------

wahhh my saliva droolling

buddy no need

all u need is to put yr hand to try

the 1st timer also can u also can


come on:wavey:
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Sep 17, 2008
20,673
3,998
1,713
Too bad I couldn't make it KC, I might as well make an appointment and drive my car to ur house for personal training lolz! :rofl:

Well, guess I have to wait for another session...:banghead:
 

kc2

1,000 RPM
Senior Member
Thread starter
Dec 2, 2009
1,354
1,410
1,713
Kuala Lumpur
thedetailers.blogspot.com
Too bad I couldn't make it KC, I might as well make an appointment and drive my car to ur house for personal training lolz! :rofl:

Well, guess I have to wait for another session...:banghead:
stay tuned...soon anther session
 

xbalance2002

1,000 RPM
Senior Member
Mar 15, 2006
1,501
349
1,683
KC,

When detailing using clay bar what type of lube to be use in process "water"?
 

kc2

1,000 RPM
Senior Member
Thread starter
Dec 2, 2009
1,354
1,410
1,713
Kuala Lumpur
thedetailers.blogspot.com
KC,

When detailing using clay bar what type of lube to be use in process "water"?
I used to buy Quik detailer but cost u rm 15-20 to clay a car & practically....not wise

now I dilute 1 oz of ONR optimum no rinse wash with 500ml of water (10 times cheaper & i wont kill my clay either)

the problem with shampoo is whether r u getting a PH balance or acidic ones, they will dissolve yr clay
just like plain water...


just some cents & $ (most of all effectiveness)
 

ikramfender

Junior Member
Senior Member
Dec 11, 2009
20
2
1,503
Kuala Lumpur
kc

should i use meguiar's clay or some other brand because i found meguiar's quite expensive rm160, and how long clay can be use(before changing new one)?
 

kc2

1,000 RPM
Senior Member
Thread starter
Dec 2, 2009
1,354
1,410
1,713
Kuala Lumpur
thedetailers.blogspot.com
kc

should i use meguiar's clay or some other brand because i found meguiar's quite expensive rm160, and how long clay can be use(before changing new one)?
thanks for the question...
is no should or shouldnt

if you can afford it
why not


but moderations comes in ....clay is just step no 2 of the total 5 steps....


only 10% of the total detailing


prep is the key of the success

check out



my whole process...


as for me buy what is moderate...& good
PG clay is only 29.90 available at hypermart


i should collect my advertising fees from them
hahhahahaha
 

renxun

1,000 RPM
Senior Member
Jul 4, 2006
1,138
37
1,648
if i remembered correctly meguire clay have 2 types... one is red colour abbresive and blue colour which is fine..... and the blue one cost more xpensive..can i just use the abresive one since its cheaper as thers no hypermart here in tawau, sabah
 

Random Post Every 5 Minutes

Hi All,


shopping around for a car - three top choices are Accord Euro R, Integra R, or the GTI
Anyone can share some info on the following on the GTI:
- any major differences between 05-07 models? Are all Mk5 and about the same?
- always been wary of Euro car electronics - any issues here like ECU problems, etc?
- seen a couple of 2 door versions being advertised - is the engine etc the same as the 4 door?
- what main things to look out for when checking one out?

Got plenty of...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience