Bolt on turbo kit

[civicturbo]

Originally posted by lilvee@Feb 22 2005, 10:08
Act, i'm in a quest to boost my d16. I got my e-manage oledi. The rest, need to survey la..

Bro.. do u mind to list down ur kit that u had installed there?

1. Turbine (brand/recond/new/ballbaring/etc..)
2. Wastegate (with/out/inter/external/down pipe...)
3. Intercooler (using fan?/on all d time?)
4. Injector (replacement/additional/
5. Engine Oil cooler (is any?)
6. Blow-off valve (psssshh... sounds cool)
7. Boost controller (manual/electronic... safety 1'st maa)
8. etc....
9.....

Hi bro ,

ok let list down the details of the turbo kit :

1. Turbine (TD-05H or our hybrid ball bearing turbo) both in recon condition.
2. Both turbine using back original internal wastegate , s/steel custom made downpipe.
3. Intercooler = if you are using front mount intercooler , no need to use fan. if you mount it at the side for hidden , then you need to use fan in ALL THE TIME.
4. Injector = remain the four original injector , additional 2 pcs bigger cc for turbo use.
5. Engine oil cooler = if have it will be must more better , but not easy to find cause we need a adaptor . Even if chop shop have they sell very expensive.
6. Blow-off valve = must have la , just using normal 1 enough already.
7. Boost controller = depends , standard boosting 0.7 - 0.8bar.
8. e-manage = MUST HAVE COMPLETE WIRING , INJECTOR AND IGNITION HARDNESS , OTHER WISE CAN'T HELP !!!!
9. turbo timer and boost meter.
10. 2.5" exhaust

 

[civicturbo]

kikikuku :
bro how is your car now ? when free yam cha la....

 

[blur_civic]

Checked out the car today...
very nicely done.. double thumbs up...

by the way... civicturbo, im the specky guy with little hair and dark green civic.. :P

 

[civicturbo]

Originally posted by blur_civic@Feb 23 2005, 16:08
Checked out the car today...
very nicely done.. double thumbs up...

by the way... civicturbo, im the specky guy with little hair and dark green civic.. :P

Bro your also take very good care on your car .... :P

Anyway nice to meet you . :)

 

[lilvee]

Thanks for your list man... i appriciate it. Another questions...

1. Now i wonder bout your boost level. Currently u set it at 0.8 bar (11.76 psi), most of imported turbo kit (from site laa) recommends max 7/8 psi only (approx 0.5 bar) with direct bolt-on. How could u do that? Our D series can tahan ka?

2. For turbo, is good to have less ristriction in ekzos design. currently i install high flow cat for my center bullet and removed original cat, this because mine is auto tranny. Wat do u suggest for turbo + auto tranny?

3. 2.5'' ekzos piping included in your offer? :D

 

[civicturbo]

lilvee :

Bro , thanks for asking , hope can help you more on turbo kit ...

1. you are right , normally standard turbo all come with 0.5 bar . But depend on which type of car we are talking , SR20/V6 TT/4G 93 all come with 0.5bar , but evo 1,2,3,4,5,6,7,8 all 1 bar standard boost, anyway i up boost it with electronic boost controller , but without it i also can up boost the turbo . the most importance is the setting for the car , if set it wrong , the engine will still damage even you have EVERYTHINGS inside your engine....

2. what i suggest is just fix 2.5" exhaust from d/pipe to rear muffler , rear muffler must be straight flow , is very good already either auto or manual .

3. :( sorry la bro is not include.....

 

[kikikuku]

Originally posted by civicturbo@Feb 23 2005, 09:31
kikikuku :
bro how is your car now ? when free yam cha la....

hi there? ;) civic turbo are u the wrkshop owner?i only know N.D,dunno the full name la,hehe..i go there asking about my car,asking him how to make bolt on waja turbo.bcoz i already met the waja turbo that he set up with bolt on turbo kit,it can boost 0.8 bar without change the block head gasket to lower the compression.it is good engine,hehe..actually he ask me to call him if i want to install the kit,coz i already have a few stuff la for my project,but ....well......the budget is run already (rrruuuuuuuunnnnnnnn aaaaawaaaaaaayyyyyyyy) :blink: :( ....so the project will pospond until enought loo...heheh.... :D B)

 

[blur_civic]

Originally posted by civicturbo+Feb 24 2005, 09:13 --></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (civicturbo @ Feb 24 2005, 09:13 )</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-blur_civic@Feb 23 2005, 16:08
Checked out the car today...
very nicely done.. double thumbs up...

by the way... civicturbo, im the specky guy with little hair and dark green civic.. :P

Bro your also take very good care on your car .... :P

Anyway nice to meet you . :) [/b][/quote]
Nice to meet you too... Hope to see you again soon.. :P

kikikuku..
how was the waja turbo? smooth?

I believe you can discuss with N.D. to use your items for the project mah.. work out a suitable budget for you..

 

[kikikuku]

the waja turbo look ok,but the time i meet him is not his free time lor.. bcoz that time he going out to bank(related to his office business)for some thing.so excidently....hi.. i call him and he said can lo if i want to se it we meet at infront mpsj building,i just se what already done with it ,he said that the car when he test 0-100 can get 6-7 second if i am not wrong.so it is good work there.job well done ma...emm maybe la i think alittle bit more day or some some day le,actually i am also study so have to maintain my budget la to pay the fee...so long life turbo or i like to call "Jentera Berhantu"(Haunted Machine) he ....he.....car,women,car,car,modified i love malaysia :P B)

 

[lilvee]

Civicturbo
Thanks man for ur advise. Now, i know wat to do next... surely i'll call u and have a test drive with u... :D and take a look ur hood.. key

Bro kikikuku...
I had accounter 1 very2 fast silver waja at kesas from usj.. its look soo sleeper... I tell you... wow its fast man :D and 1 of d reason why i wan to boost my car... hihihi

Bro akimoto... thanks man, to share ur experiance... ;)

 

[kikikuku]

Originally posted by lilvee@Feb 26 2005, 15:44
Civicturbo
Thanks man for ur advise. Now, i know wat to do next... surely i'll call u and have a test drive with u... :D and take a look ur hood.. key

Bro kikikuku...
I had accounter 1 very2 fast silver waja at kesas from usj.. its look soo sleeper... I tell you... wow its fast man :D and 1 of d reason why i wan to boost my car... hihihi

Bro akimoto... thanks man, to share ur experiance... ;)

what the plate number?or how it is look like?do the waja have a wierd look? :D

 

[lilvee]

sorry la bro.. didnt see it the plate no.
look stock standard no weird things.

 

[kikikuku]

just asking if look kind weird just always se coz i always go to ss 15 thaipan,eh maybe u meet the waja turbo that made by dragger motorsport he is working at that area,but he is in brown one,hihi....turbo...turbo...("jentera berhantu") :unsure: :unsure: :blink: B)

 

[blur_civic]

Where is this dragger motorsport? :P

 

[kikikuku]

hi,the place at kepong,there is a industrial area there,i dont remember the name but just beside sri damansara,also near to tmn ehsan lo.i dont know la how to say it but if i am not wrong already somebody here tell how to go there try check the posting before k,y u want to upgrade too??