Blow Off Valve.....

MKMD428

500 RPM
Senior Member
Aug 21, 2005
876
190
5,043
johore
no doubt , the best bov in the market currently is
Tial , Turbosmart , Synapse

i vote synapse in a heartbeat
http://www.youtube.com/watch?v=NQAcVgKPXG4

remember, the best bov in the market is electronical and is above our budget for sure ehhehe, and sometimes nt practical
the best doesnt mean best for your car. Get the most suitable BOV to ur car, not get the best bov in the market
bravo jin. well conversed.
rule of thumb for choosing the best BOV for our engine is by what bar or psi our current engine is running. am i right or right? hihihihihihihi
 

E6XLancer

Known Member
Senior Member
May 2, 2010
284
6
1,518
1 Malaysia
Previously I'm using Greddy Type R b.o.v on my 4G63T with boosting at 1.6 bar. No leak at all & sound very loud...
 

clockwork

Known Member
Senior Member
Thread starter
Dec 2, 2005
416
18
1,518
JB~SIN
thanks for the tips bro....

---------- Post added at 11:33 AM ---------- 6 hour anti-bump limit - Previous post was at 11:24 AM ----------

i noticed most of the BOV base is different HKS ssqv....right now i just use a C clip to secured but others base look different how to install????
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
its called a flange.....there are 2 types.....1st universal ones...normally used if youre using
SS intercooler pipings to TB.

2nd just cut the std hose & place the flange(pipe) type in between.
 

clockwork

Known Member
Senior Member
Thread starter
Dec 2, 2005
416
18
1,518
JB~SIN
its called a flange.....there are 2 types.....1st universal ones...normally used if youre using
SS intercooler pipings to TB.

2nd just cut the std hose & place the flange(pipe) type in between.
yah my intercooler piping all replace coz currently using evo 6 intercooler bro.....
 

Elmo_X

Known Member
Senior Member
Aug 8, 2006
309
2
1,518
bros im a newbie here on turbo charging
any idea how to reduce the sound of the bov ??? or silent the bov ??? its quite annoying sometimes , does recirculation can reduce the sound???
 

MKMD428

500 RPM
Senior Member
Aug 21, 2005
876
190
5,043
johore
simple... rev super low when changing gear...
hihihihi

yup..i think re-circulation might help. never done it though.
 

Elmo_X

Known Member
Senior Member
Aug 8, 2006
309
2
1,518
just want to ask any pro and cons of replica greddy RZ / RS bov ???
i hear from zerone shop saying max boost 1 bar after that " BOMB " the bov and get a new 1 so he recommend me get a orig RZ greddy

whats your advise otais
 

jinkl

4,000 RPM
Senior Member
May 22, 2004
4,623
376
3,183
Kuala Lumpur
haih, some ppl still dnt understand wht surge is , hmm
its nt the bov tht makes tht sound
 

achelone

Known Member
Senior Member
Jun 3, 2009
125
27
1,528
you will hear the surge sound when the bov set too tight and during throttle release. the throttle body shut immediately and the pressurize air is trapped and travel back and forth throttle body and turbo compressor. the psshh psshh psshh sound is the pressurized air moving in between. really cool but not recommended if the boost is high.

bov sound usually will discharge once not psshh psshh psshhh. AFAIK FYI :D

---------- Post added at 12:54 PM ---------- 6 hour anti-bump limit - Previous post was at 12:53 PM ----------

you will hear the surge sound when the bov set too tight and during throttle release. the throttle body shut immediately and the pressurize air is trapped and travel back and forth throttle body and turbo compressor. the psshh psshh psshh sound is the pressurized air moving in between. really cool but not recommended if the boost is high.

bov sound usually will discharge once not psshh psshh psshhh. AFAIK FYI :D
 

Random Post Every 5 Minutes

This is for a friend. Was wondering if the STP carbeurateur cleaner actually works. does it increase milage?

thanks in advance.
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience