6a12tt-rs.perdana v6

[budakkampungaje]

which part of the top leaking?
at the oil cap area?
or between rocker cover and head?
or between head and block?
or on top of rocker cover?

gamba tarak, ko bgtau pon tak jelas..

the oil is in area V6 DOHC 24 vavle sign beside the engine oil cap....susah laaa nak upload pic kat opis kena block...

 

[budakkampungaje]

http://www.zerotohundred.com/newforums/attachment.php?attachmentid=306772&stc=1&d=1277869165

 

[NeuroOne]

if at that area, i can think of nothing other than spark plug seal leaking.
or maybe also the rocker cover.
susah nak agak la bro..
sebab kat atas tu, yg ade lobang cuma spark plug dgn oil cap je.
rocker cover dan head maybe leaking ke tepi.

 

[budakkampungaje]

if at that area, i can think of nothing other than spark plug seal leaking.
or maybe also the rocker cover.
susah nak agak la bro..
sebab kat atas tu, yg ade lobang cuma spark plug dgn oil cap je.
rocker cover dan head maybe leaking ke tepi.

that's whyyy aaaa ari tu ada gak cek spark pulg tapi kering jeee.....that oil siap bertakung lagi kat sign tuuu....i think want too put some more rubber at that cap.....if is leaking just get to workshop...

 

[DanzEterna]

just change your oil cap, rm15, problem settled.

 

[budakkampungaje]

my prob is settle the prob is the screw at the top cover tak ketat.....i don't know why....thanks too all

 

[NeuroOne]

laa..
itu ke probnye.. hehe..

 

[budakkampungaje]

that's why laa broooo...adoiiiii...

 

[sigamonta]

just wanna know whether i can fit a 6a12tt engine into my gen2 engine bay...???
n will the jpj going to give me a hard time...

 

[mhazim]

just wanna know whether i can fit a 6a12tt engine into my gen2 engine bay...???
n will the jpj going to give me a hard time...

i think cannot because can masuk 2.0 into 2000cc body only

 

[sigamonta]

i think cannot because can masuk 2.0 into 2000cc body only

thnx 4 the info bro...but juz let say we put all the jpj's regulations out of the equation, do u think it can be done..?

 

[mhaziem_ke30]

thnx 4 the info bro...but juz let say we put all the jpj's regulations out of the equation, do u think it can be done..?

yeap sure canbe done..there will be alot of adjustment of gearbox location, engine mounting etc..not recommended..

 

[DanzEterna]

i dont think can pass JPJ.
for gen2, evo 4-6 should be suitable.

 

[ajin]

juz wnna ask..ma fwen juz pluck in 6a12tt to his beloved perdana b4 rayer...all stock standard...he vwy satisfy wit the performnce...he increase the boost to 1 bar n boost appiely...da prob came whn he chnge his clutch plate using trinity 4 puck clucth...after pull n pull n pull the car broke down...put gear into no 1,the car not moving same goes to 2,3,4,5...only can reverse...open check the gb, the teeth had broke...izzit becoz of too much grip from the clucth or 6a12tt gb cannot tahan??

 

[DanzEterna]

did yr fren plonk the whole halfcut engine from 6a12tt or bought the engine & gbox separately...? the gb is very reliable, should withstand the 4 puck clutch....6 puck also can....or just yr fren is plain unlucky that time.

---------- Post added at 07:15 AM ---------- 6 hour anti-bump limit - Previous post was at 07:14 AM ----------

tell yr fren to lower his boost to 0.8.