4G93T Club

[wailup]

welcome to the club oye! im also new to 4g93t, but the side-mount intercooler is sufficient for std setup and make sure it receive air flow from the front. the symptom of not getting 'cooled' air is engine knocking when boosting. any bigger intercooler will increase turbo lag de. let see wat others sifu says.. enjoy yer ride, bro!

 

[contreasjun27]

Bro. checked all external edi. changed spark plug and all coil. intercooler piping checked.
Now take off the turbine to check. it might be turbine leak??
it boost til 0.5 and the misfire occurs. cannot go futher.. tomorrow changing back to td04 and try again.
Will update u guys sooon

i thought u using td04 all this while?
since when change to td05 without telling me sob sob...

 

[badturz]

contreasjun27 - Sorry dude. i got this turbo by best frd. He ask me pay installment.
Then after i changed got all these problem. haahaa! quite sad too. cant drive for at least 2 weeks edi. i think going to fix it .. take me about 1 month edi.

Don angry dude. i treat u minum after i got back kl. Now i am in hometown holiday.

I am still new in Modification. i need ur advice still. Where is the workshop u mod all the while dude?

 

[yashiofactory]

i heard somebody from this thread just install the TD05 20G + highcams....very scary heheheheheh....cheers

BADTURZ - Its normal bro if got problem ar the firstime just put some patience on it and soon you will be the happy with the things...hahahhaha

P/S : Quite a longtime not signed in to this thread.....cheers

 

[contreasjun27]

contreasjun27 - Sorry dude. i got this turbo by best frd. He ask me pay installment.
Then after i changed got all these problem. haahaa! quite sad too. cant drive for at least 2 weeks edi. i think going to fix it .. take me about 1 month edi.

Don angry dude. i treat u minum after i got back kl. Now i am in hometown holiday.

I am still new in Modification. i need ur advice still. Where is the workshop u mod all the while dude?

haha not angry lah bro...chill lah whats the problem beside misfire bro?
btw guys right now my ride like siput siput like that, dam hard to drive...
rpm idle go crazy...think my engine going to kaput already

 

[yashiofactory]

haha not angry lah bro...chill lah whats the problem beside misfire bro?
btw guys right now my ride like siput siput like that, dam hard to drive...
rpm idle go crazy...think my engine going to kaput already

Hehehhe contreasjun your car going to kaput but mine already inside the workshop heheheheheh....crank n the conrod kong already now planning to put something inside but need to find extra fund n im still thinking of what a best things should i put inside....anyway cheers

 

[badturz]

contreasjun27 hrmm.. misfire is the only problem so far i got. hrm.!

yashiofactory 20G is poison by u man! .. hahaha! btw, u mind to share how the td05 20g working? ... hrmm in term of how the pull feeling ? .. hahah.. very very pull ?
and the turbo lag how to solve?

 

[contreasjun27]

Hehehhe contreasjun your car going to kaput but mine already inside the workshop heheheheheh....crank n the conrod kong already now planning to put something inside but need to find extra fund n im still thinking of what a best things should i put inside....anyway cheers

haha forged piston time bro!!!

---------- Post added at 11:20 PM ---------- 6 hour anti-bump limit - Previous post was at 11:19 PM ----------

contreasjun27 hrmm.. misfire is the only problem so far i got. hrm.!

yashiofactory 20G is poison by u man! .. hahaha! btw, u mind to share how the td05 20g working? ... hrmm in term of how the pull feeling ? .. hahah.. very very pull ?
and the turbo lag how to solve?

20G must be super lag...im using 18G already lag like crazy dy..
sometimes missing my td04 baby

 

[badturz]

Haahaa..! i am agree with u too. super lag. but i have not tried the car. already misfire. grr..

i mean after done changing turbine. misfire occurs. only turbine + injector + wastegate.
Then it occurs misfire. grr!

Btw, how much RPM ur turbo kick in

 

[yashiofactory]

Contreasjun27 -Im also have an intention on forged things but right right now im thinking of changing to other car maybe 6 cyllinder or rotary....hehehehehhe....n the current car should put the things back together but a little bit power then the standard....hehehehehhe

Badturz - About lag im agree with that but somehow i dont feel it anyway...hehehehheh during this time the g/box play the main role to support the engine......some people said the mivec g/box more powerfull but just stick to your normal gsr g/box n made it to 2wd lock then you will feel the different.....i mean not the normal 2wd lock but some of the things inside it need to take out...hehehhehehe i already mention this to WIRA3319 from KK about this before...cheers

 

[clanzkiller]

lmfao last nite i got nothing to do, i go youtube search for borg warner turbo...and.................i couldn't sleep after watching + hearing the video clips..........god dam it

 

[badturz]

yashiofactory - Thank for the advice. Wahaha.. Rotary. spending kao kao wor.! hahaha!@!
6 cylinder - Supra in line 6.. Good good.. i wish i had the money for that too

clanzkiller - very very nice. hahaha! but what the pricing in malaysia?

 

[wailup]

anyone here use V99Bylon engine oil before??? comment pls...

 

[[H] [K] [S]]

borg warner expensive lar..... go get bulls eye turbo lar..... certain turbine can plug & play.

 

[badturz]

Yea . i heard that bull eye is good enough edi. haha!

 

[contreasjun27]

Haahaa..! i am agree with u too. super lag. but i have not tried the car. already misfire. grr..

i mean after done changing turbine. misfire occurs. only turbine + injector + wastegate.
Then it occurs misfire. grr!

Btw, how much RPM ur turbo kick in

mine at least 4.5k bro...
but the top speed is spectacular lah...
plus i havent retune yet...
emanage setup still TD04 setup haha

---------- Post added at 09:59 PM ---------- 6 hour anti-bump limit - Previous post was at 09:57 PM ----------

Contreasjun27 -Im also have an intention on forged things but right right now im thinking of changing to other car maybe 6 cyllinder or rotary....hehehehehhe....n the current car should put the things back together but a little bit power then the standard....hehehehehhe

Badturz - About lag im agree with that but somehow i dont feel it anyway...hehehehheh during this time the g/box play the main role to support the engine......some people said the mivec g/box more powerfull but just stick to your normal gsr g/box n made it to 2wd lock then you will feel the different.....i mean not the normal 2wd lock but some of the things inside it need to take out...hehehhehehe i already mention this to WIRA3319 from KK about this before...cheers

mine to share more on this 2wd lock with us bro?
i guess my GB gonna kaput soon any great GB to replace with?

 

[[H] [K] [S]]

eh u guys not interested in TT session?:hmmmm: i mean for those in kl/pj/selangor district?

 

[badturz]

OMG .. 4.5k hahaha! then i definitely will miss my td04 a lot ..! !!

My target i tot will be 4k .. 18g also 4.5k edi. hehee.!!

very interested but now in hometown and my car don know when come out
hahaha!

 

[wailup]

wanna ask.. anyone tried V99Bylon engine oil before?

 

[contreasjun27]

eh u guys not interested in TT session?:hmmmm: i mean for those in kl/pj/selangor district?

interested but right now car is sick..
today got white smoke coming out from exhaust...holy cow..
and my foremen say got engine oil..
oh no GG.com

---------- Post added at 10:50 PM ---------- 6 hour anti-bump limit - Previous post was at 10:49 PM ----------

OMG .. 4.5k hahaha! then i definitely will miss my td04 a lot ..! !!

My target i tot will be 4k .. 18g also 4.5k edi. hehee.!!

very interested but now in hometown and my car don know when come out
hahaha!

actually I have not fine tune my car yet..
my foremen say boost can come @ 4k RPM
but right now I need to settle my issue for engine oil in my exhaust!!!
damn

 

[chrissyong]

maybe is piston.......

 

[badturz]

contreasjun27 - Everyone is in trouble now. wahaha! Good luck in repairing first.

oh.. 4k is still good.. have to give up 1k rpm in order to get more powerful. wahhahah! but hows the pull man?

 

[[H] [K] [S]]

contreasjun27 - possibility piston kong..... hopefully the block not scratched. juz pray not the turbo kong..... god bless!!

 

[contreasjun27]

contreasjun27 - Everyone is in trouble now. wahaha! Good luck in repairing first.

oh.. 4k is still good.. have to give up 1k rpm in order to get more powerful. wahhahah! but hows the pull man?

the pull not bad bro..much much better than td04...
easily 3rd gear can pull alot already bro

---------- Post added at 12:52 PM ---------- 6 hour anti-bump limit - Previous post was at 12:51 PM ----------

contreasjun27 - possibility piston kong..... hopefully the block not scratched. juz pray not the turbo kong..... god bless!!

engine checked...piston ring break already..
just bought supercharger piston 81mm and ARP nuts for it..
cost me a bomb right now sob sob

 

[badturz]

contreasjun27 - wah. bigger piston nice wor.... Btw, i using tial wastegate 38mm 1 bar spring. means i have to boost above 1 bar?