1. Bump posts missing? We are spring cleaning the Forums so these posts are being removed to optimize the database further. Don't be concerned, you can continue to do whatever you do. Will be developing the site further as well through the coming weeks so do watch out for those! You can close this notice now
    Dismiss Notice

Cefiro A32 VQ20DE - RPM move up and down during overdrive

Discussion in 'The Cefiro Club Malaysia' started by millenric, Jun 29, 2012.

  1. kswee

    kswee 5 Year | Silver

    Joined:
    Nov 18, 2012
    Messages:
    43
    Likes Received:
    1
    Hi millenric, can i have your chart file?due to education purpose.
     
  2. marksmensrea

    marksmensrea Senior Member
    Senior Member

    Joined:
    May 29, 2006
    Messages:
    10
    Likes Received:
    0
    Thanks again Mr. Loh, would you happen to have a picture of the TCU unit you took out ?

    Would it be possible to just send me a few pics if possible?
     
  3. marksmensrea

    marksmensrea Senior Member
    Senior Member

    Joined:
    May 29, 2006
    Messages:
    10
    Likes Received:
    0
    Hi Millenric, Dont mind me asking , where did you get your TCU online and how much was it?
     
  4. deckerloh

    deckerloh 5 Year | Silver

    Joined:
    Oct 30, 2012
    Messages:
    7
    Likes Received:
    0
    Hi mark,

    Unfortunately I can't attach photo with my iPad. I can email to u if u want.
     
  5. mie627

    mie627 New Member

    Joined:
    Aug 17, 2013
    Messages:
    4
    Likes Received:
    1
    Dear All

    Just get A32 this month..
    Having same problem. Is there any body know where to find the TCU in Kedah?

    Please advise.

    Regards
    New member..
     
  6. kmunz

    kmunz Senior Member
    Senior Member

    Joined:
    Jun 26, 2005
    Messages:
    148
    Likes Received:
    0
    Recently just changed my A32 auto gearbox and noticed have the same issue as TS. it is actually a 2nd recon gearbox as the 1st one which was replaced having the same problem. After checking through forum, I question my mech if they replaced the TCU as well when they replace the gob and they said they did. However due to the problem still exist, I asked my mech to use back my old TCU but still problem persist. Any sifus here can suggest what I can do about it? My mech seems like dunno how to rectify the problem.
    Also, I noticed that if I switch OD off, the car will stay in 2nd gear and it won't switch to 3rd gear when I am accelerating 4K - 5K rpm.
     
  7. 12savefuel

    12savefuel Senior Member
    Senior Member

    Joined:
    Dec 10, 2008
    Messages:
    195
    Likes Received:
    75
    well you dont know for sure if they actually tried another ecu. if the gear won't up shift between 2-3rd with out od, there has to be a signal problem, its very hard to help when there is so little info for us to work on, remember in order for the trans to aork properly, the trans has to be in good mechanical condition. Then the rest would be sensor or wiring problem and that could be anywhere, the gearbox is controlled by the tcu and the tce communicates with the ecu also, so connection problem could be anywhere. Or the tcu or ecm got problem, speed sensor on the gearbox got problem, so many bro. you might want to send to tcsc to see if they can find any trouble codes first and start from there.
     
  8. Q50

    Q50 New Member

    Joined:
    Aug 30, 2014
    Messages:
    8
    Likes Received:
    0
  9. squall4896tuba

    squall4896tuba New Member

    Joined:
    Nov 14, 2017
    Messages:
    2
    Likes Received:
    0
    Hello I also have the similar problem while driving around 60km/h above, gear stucked and bounce between 4th gear and final drive.

    May I know where exactly i can find the TCM to replace, dont tell me from chop shop and i know that already...

    Thanks.
     

Share This Page