Caldina Engine Conversion

tougemax

Known Member
Senior Member
Apr 2, 2007
61
26
1,518
Hai. currently driving caldina zt . wanna ask can the caldina old model engine 3s gte ( st215 ) manual convert to my ride.
 

tougemax

Known Member
Senior Member
Thread starter
Apr 2, 2007
61
26
1,518
05 caldina zt FF Ride. less power so wanna upgrade turbo . heard that st 215 is more powerful than st246 . and its manual transmission , i more like manual than auto .any suggestion
 

har1th7

Known Member
Senior Member
Apr 1, 2008
371
42
1,528
my opinion...

even if u want manual, if take halfcut st215 still alot hassle, better take fullcut st246, transfer all (engine, gb auto, front & rear diff)...
then try running first, if everything goes well, then get the transmission & running gear from st215 for 2nd project...

problem faced,
- pedal for clutch will interrupt foot brake,
- transfer foot brake to hand brake, must sacrifice your center console.

propose,
- BOT your current engine
- convert 3sgte auto, but running just fwd (already been done here)

*guys from Russia has successfully convert caldina st246 to manual, try google...
 

budakkampungaje

Known Member
Senior Member
Dec 19, 2007
317
38
1,528
Dengkil
05 caldina zt FF Ride. less power so wanna upgrade turbo . heard that st 215 is more powerful than st246 . and its manual transmission , i more like manual than auto .any suggestion
what i know bout this 3s gte engine is the PS is same 260ps even for st215 or st246....st246 is from model GT-FOUR C edition,GT-FOUR and GT-FOUR N edition for ST215 is model GT-T,GT-T aerial specification ang GT-TS version...only the difrent is st215 have a manual transmission and st246 is only auto transmission and the POWER DENSITY

st215 GT-T

Displacement, cc 1998
Engine model 3S-GTE
Max.power (Net), kw(PS)/rpm 260 ps (191.23 kw) / 6000 rpm
Max.torque(Net), N*m(kg*m)/rpm 33.0 kg*m (323.62 N*m) / 4400 rpm
Power density 5.54 Engine type Serial 4 cylinder DOHC16 valve turbo
Engine information Twin cam
Fuel system EFI (electronic fuel injection)
Turbocharger Turbo
Fuel type Unleaded premium gasoline
LEV system (Low emission vehicle) No
Compression ratio 9
Bore, mm 86
Stroke, mm 86
Final gear ratio
Fuel consumption at 10-15 modes, l/100km 9


st246 GT-FOUR N edition

Displacement, cc 1998
Engine model 3S-GTE
Max.power (Net), kw(PS)/rpm 260 ps (191.23 kw) / 6200 rpm
Max.torque(Net), N*m(kg*m)/rpm 33.0 kg*m (323.62 N*m) / 4400 rpm
Power density 5.73 Engine type Serial 4 cylinder DOHC16 valve turbo
Engine information
Fuel system EFI (electronic fuel injection) (Ci (central injection)
Turbocharger Turbo
Fuel type Unleaded premium gasoline
LEV system (Low emission vehicle) Yes
Compression ratio 9
Bore, mm 86
Stroke, mm 86
Final gear ratio
Fuel consumption at 10-15 modes, l/100km 9.4


this your spec ZT

Displacement, cc 1998
Engine model 1AZ-FSE (D-4)
Max.power (Net), kw(PS)/rpm 152 ps (111.80 kw) / 6000 rpm
Max.torque(Net), N*m(kg*m)/rpm 20.4 kg*m (200.06 N*m) / 4000 rpm
Power density 8.62
Engine type Serial 4 cylinder DOHC16 valve
Engine information
Fuel system D-4 (inside the tube directly fuel injector)
Turbocharger No
Fuel type Unleaded regular gasoline
LEV system (Low emission vehicle) Yes
Compression ratio 9.8
Bore, mm 86
Stroke, mm 86
Final gear ratio
Fuel consumption at 10-15 modes, l/100km 7.1
 

tougemax

Known Member
Senior Member
Thread starter
Apr 2, 2007
61
26
1,518
wao. really good suggestion and many information . thx guys .
 

Wanggot

Senior Member
Senior Member
May 22, 2006
3,906
62
3,148
Jay Bee
Some frens told that GT4 4WD gearbox will be problem when transplant as FF in a ZT
 

normality78

3,000 RPM
Senior Member
Nov 14, 2003
3,052
23
5,138
JB
Visit site
my opinion...

propose,
- BOT your current engine
- convert 3sgte auto, but running just fwd (already been done here)

Care to share on how 3SGTE auto convert to FWD? Can stock GT4 auto convert to fwd?
 

Ryuuken

Known Member
Senior Member
Apr 2, 2011
204
98
528
Subang Jaya

Random Post Every 5 Minutes

anybody can help me what i need to ensure the mivec system can running in my 4g93 na engine if i change the:

- Mivec head, intake manifold, throttle body, distributor, plug cable. Can the mivec function well if I still use the same wiring and ecu? Or can it function if i just install the mivec controller? I hope anybody can share the knowledge, experience and information.Thank U...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience