mods on Accord CF4

[pyang8018]

pokya...start to change 4 pot la.hehe....mmg bengang mlm tu..geng2 ek mmg mcm tu..kalu nak test..kat highway la..x pun dgn kete demo....hehehe..

---------- Post added at 12:56 AM ---------- 6 hour anti-bump limit - Previous post was at 12:45 AM ----------

to all abe2....any idea how to clean inside extractor???use what chemical??plan to remove carbon inside before installation.....

bro sato....my car championship white...cost around 3K...kalau 2K...normal paint la...

abe fairy....u know where shop can service wilwood brake...i plan to service la..1 piston x main..

 

[busbar]

prob. solve..my car back to normal with new front rotor disc..hehe..thanks pak alwi..pakar jugak demo ni...
btul la kata bro Sato..got a lot electronic stuff at my car..gbox ecu wiring shorted during installation alarm & oso during housekeeping many wire yang x pakai..huhu..2 times replace gbox..2 times replace gear oil...so moral that story..don't install brg pelik in ur car..hehehe...

bro, where g/box ecu placed.. not same with engine ecu.. my car also got problem.. after 2 month using H23A.. the car start jerking..check engine coming.. but after change the old F20B ecu, d problem solved.. don't know d performance will drop cause using f20b ecu n engine h23a.. somebody here know...

 

[alwhitesat]

Pak Dolah ajak T.T.....anyone?????????????????????

 

[5efte]

Pak Dolah ajak T.T.....anyone?????????????????????

Yeah...TT tonite!

 

[fairy]

pokya...start to change 4 pot la.hehe....mmg bengang mlm tu..geng2 ek mmg mcm tu..kalu nak test..kat highway la..x pun dgn kete demo....hehehe..

---------- Post added at 12:56 AM ---------- 6 hour anti-bump limit - Previous post was at 12:45 AM ----------

to all abe2....any idea how to clean inside extractor???use what chemical??plan to remove carbon inside before installation.....

bro sato....my car championship white...cost around 3K...kalau 2K...normal paint la...

abe fairy....u know where shop can service wilwood brake...i plan to service la..1 piston x main..

abang pyang, actually dalam extractor tu kotor sangat ke?? usually if got carbon pun kita tak cuci sebab tak lama lagi it will get kotor again... but becareful when using chemical sebab the outside besi color will change and get real ugly... wilwood i tak pasti la bro... but if normal service my mechanic boleh buat but if have to change parts then tak boleh la...

bro, where g/box ecu placed.. not same with engine ecu.. my car also got problem.. after 2 month using H23A.. the car start jerking..check engine coming.. but after change the old F20B ecu, d problem solved.. don't know d performance will drop cause using f20b ecu n engine h23a.. somebody here know...

the only way to know is to dyno run..

i oso confuce coz this prob never happen before.......anyway tq fery for ur advice.....

---------- Post added at 10:35 PM ---------- 6 hour anti-bump limit - Previous post was at 09:43 PM ----------

to all cf4 cifus, i need ur advice n suggess.....i want to change my gear box oil, what brand is the most suggested n effisen for f20b manual transmition.......hope share ur knowledge, tq.....but for engine oil i use ENEOS oil cos it is speacially for japanese vehical

last time my sir-t i use motul ff lsd2 recommended by abang aja...

 

[Sato]

Thanks for all the info ~

I've confirmed the color to the paint shop.....championship white with serbuk blink blink !

At 1st i asked him what brand paint he using....he said no worries...he will use a bird logo brand.....and i have no idea what birdie he talking about ~

Then i request dupont....but he said if i want dupont also can...but not as good as birdie wooo..... So...after rectify....it's Glasurit he is talking about ! So....i will stick to Glasurit lor...then i asked him again how much for the whole car.....he said no worries.....Under RM3k ~!

So....i guess it's still cheap rite ?

This painter recommended by my mechanic la...close fren....so i think got discount for me ~

Now sent car to spray engine bay 1st.......then tow back to mechanic and tuck in the engine....

Only then will send the car for whole spraying......plus those bodykits la.....

Those fren wanna change spoon calipers ? I dun recommend the twin block la...as it's really noisy with the pads inside calipers moving around ! Maybe the monoblock is better.....but dunno if fit or not !

---------- Post added at 06:31 PM ---------- 6 hour anti-bump limit - Previous post was at 06:17 PM ----------

abang pyang, actually dalam extractor tu kotor sangat ke?? usually if got carbon pun kita tak cuci sebab tak lama lagi it will get kotor again... but becareful when using chemical sebab the outside besi color will change and get real ugly... wilwood i tak pasti la bro... but if normal service my mechanic boleh buat but if have to change parts then tak boleh la...

Bro fairy....the extractor ar...outside is like golden color rite.....but there's still like some karat color.....something like darker color......can clean ar ? Using what to clean ?

The calipers....if wanna service...i think need to replace those rubbers woo....unless u get the same size for those rubber rings....u can't fit it perfectly ! Am i not correct ?

 

[slownstedy]

abang pyang, actually dalam extractor tu kotor sangat ke?? usually if got carbon pun kita tak cuci sebab tak lama lagi it will get kotor again... but becareful when using chemical sebab the outside besi color will change and get real ugly... wilwood i tak pasti la bro... but if normal service my mechanic boleh buat but if have to change parts then tak boleh la...




the only way to know is to dyno run..



last time my sir-t i use motul ff lsd2 recommended by abang aja...

thank u abg fairy.......

---------- Post added at 06:44 PM ---------- 6 hour anti-bump limit - Previous post was at 06:37 PM ----------

I'm putting in F20b ! Hehehehe....SIR.... no money ar ~

Unless u can help me find a good H22a engine with RM4000 round ~ Hehehhee

Hey bro.....wanna ask....what's the code for Euro R white color ar ? I wanna ask mechanic to take out everything from the engine bay and spray it white 1st......

Does Euro R white comes like abit yellowish ar ?

halo abg sato, my car color code is NH-624P1, pearl white same as cl7 color.......i ever ask some painter bout color brand........he said all brand use the same code for each color.......

 

[pyang8018]

bro, where g/box ecu placed.. not same with engine ecu.. my car also got problem.. after 2 month using H23A.. the car start jerking..check engine coming.. but after change the old F20B ecu, d problem solved.. don't know d performance will drop cause using f20b ecu n engine h23a.. somebody here know...

roger....g/box ecu not same with engine ecu....where g/box ecu place???:hmmmm:must ask alwi's mechanic la..sorry bro i don't know...abe alwi....tolong jawab....huhu.....i think maybe ur g/box ecu 'rosak' kot...if check engine light on...u must do dyno run..my case last month not same like u becoz check engine not coming..just wiring shorted during installation alarm system...during installation h23a..have u change wiring old f20b g/box to h23a???bro....u can kol me directly at 019-9368787..


abe fairy...sikit je carbon to...just cuci with sabun n tembak angin...so far ok la..hehe...

 

[Sato]

halo abg sato, my car color code is NH-624P1, pearl white same as cl7 color.......i ever ask some painter bout color brand........he said all brand use the same code for each color.......

Thanks bro....

NH-624P1...Premium Pearl White....at 1st i thought of having this color...but looking at those catalogue....u know...a small square box of colors for u to choose....seems really yellowish lor...maybe his catalogue damn old la....

Anyway....i'm getting the championship white sprayed inside engine bay 1st...will check if i like it or not....hehehe....still can choose 624p if i want it wrapping outside car....

But yesterday....saw a lambo gallardo....white color.....number plate 68....damn nice ~ Wonder what color code that it ! hehhehe

 

[aja]

Sato,

F20B SirT halfcut...

http://www.mudah.my/Big+vtec+f20+5speed-7168905.htm

Murah ni.

 

[fairy]

Thanks for all the info ~

I've confirmed the color to the paint shop.....championship white with serbuk blink blink !

At 1st i asked him what brand paint he using....he said no worries...he will use a bird logo brand.....and i have no idea what birdie he talking about ~

Then i request dupont....but he said if i want dupont also can...but not as good as birdie wooo..... So...after rectify....it's Glasurit he is talking about ! So....i will stick to Glasurit lor...then i asked him again how much for the whole car.....he said no worries.....Under RM3k ~!

So....i guess it's still cheap rite ?

This painter recommended by my mechanic la...close fren....so i think got discount for me ~

Now sent car to spray engine bay 1st.......then tow back to mechanic and tuck in the engine....

Only then will send the car for whole spraying......plus those bodykits la.....

Those fren wanna change spoon calipers ? I dun recommend the twin block la...as it's really noisy with the pads inside calipers moving around ! Maybe the monoblock is better.....but dunno if fit or not !

---------- Post added at 06:31 PM ---------- 6 hour anti-bump limit - Previous post was at 06:17 PM ----------



Bro fairy....the extractor ar...outside is like golden color rite.....but there's still like some karat color.....something like darker color......can clean ar ? Using what to clean ?

The calipers....if wanna service...i think need to replace those rubbers woo....unless u get the same size for those rubber rings....u can't fit it perfectly ! Am i not correct ?

wahh.. glasurit very good and expensive :) below 3k is a good price bro... glasurit logo is actually a parrot called a scarlet macaw.. jangan jangan afterwards you see the logo become ayamas logo... hehehe.. just joking :p

ya i know that colour, usually ppl will use autosol and rub from midnight until morning, but the stain will still be there.. unless you rub it from midnight till morning for 2 weeks like how abang bzbodi did to his then looks nice.. exhaust shop got machine which can polish until kilat but the edges and bends cannot because the machine cannot reach the crevices...

---------- Post added at 10:59 PM ---------- 6 hour anti-bump limit - Previous post was at 10:52 PM ----------

roger....g/box ecu not same with engine ecu....where g/box ecu place???:hmmmm:must ask alwi's mechanic la..sorry bro i don't know...abe alwi....tolong jawab....huhu.....i think maybe ur g/box ecu 'rosak' kot...if check engine light on...u must do dyno run..my case last month not same like u becoz check engine not coming..just wiring shorted during installation alarm system...during installation h23a..have u change wiring old f20b g/box to h23a???bro....u can kol me directly at 019-9368787..


abe fairy...sikit je carbon to...just cuci with sabun n tembak angin...so far ok la..hehe...

abang pyang.. kalau check light on, get somebody with a LAUNCH error code diagnostic tool to cucuk in your obd2 socket... i usually do it for free, but selalaunya kat kedai is about rm20 to 80... just my two sen la bang.. hope your car gets well soon :)

---------- Post added at 11:03 PM ---------- 6 hour anti-bump limit - Previous post was at 10:59 PM ----------

abang aja good price the engine.. now mugen extractor also going for about 1500 at least...

abang aja, that day i went to eat maggi goreng near your house... wanted to call you but almost 3am dah.. hehe

 

[wan_iswandy]

aluuuu abe2 smua..

long time not check2 here, just finish my raya holiday heheh.. waaa so happening here, ada open house ke kt post kita ni hehehe.. yup my car just bought new baju raya, kaler red rosso scuderia.. me? pakai baju raya tahun lepas je huhuuh.. selamat hari raya to all brothers here.. maafkan salah silap hamba ye.. =)

 

[pyang8018]

wow abe wan..ur ghoster color ganaz like u...really cun....

 

[fairy]

aluuuu abe2 smua..

long time not check2 here, just finish my raya holiday heheh.. waaa so happening here, ada open house ke kt post kita ni hehehe.. yup my car just bought new baju raya, kaler red rosso scuderia.. me? pakai baju raya tahun lepas je huhuuh.. selamat hari raya to all brothers here.. maafkan salah silap hamba ye.. =)

pehhhhh!!!! cun man cun... bro, pinjam boleh?? really nice la.. tapi eric mesti sedih, sebab dah tak nampak macam track car :p Selamat Hari Raya bro :)

---------- Post added at 03:20 AM ---------- 6 hour anti-bump limit - Previous post was at 03:19 AM ----------

cantik cantik...

 

[busbar]

aluuuu abe2 smua..

long time not check2 here, just finish my raya holiday heheh.. waaa so happening here, ada open house ke kt post kita ni hehehe.. yup my car just bought new baju raya, kaler red rosso scuderia.. me? pakai baju raya tahun lepas je huhuuh.. selamat hari raya to all brothers here.. maafkan salah silap hamba ye.. =)

bro, saw ur car WLX XXXX (may be) at kota bharu, jalan pasir hor going a head to kubang kerian..at raya ke 5 kot.. xsempat nak high beam.. ur car move very fast like ferrari scuderia..hehehe