EJ-DE on Kancil

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Sep 17, 2008
20,673
3,998
1,713
if k3vet fliptronic gear can install in kelisa, I want 1:burnout:
I just found out a workshop specialize in k cars, they have a yrv turbo kelisa, allow me to test drive If I want. Won't be cheap. Engine alone cost 3-4K, labour give it 1K+. Exhaust system they can do as well. So should be total at least around RM7K not yet include wear and tear of the half cut engine.

Rear brakes I ask before. Not recommended to change to rear disc brake. Handbrake might not be strong enough after that.
 

twistedichc

2,000 RPM
Jan 22, 2013
2,930
255
683
Ampang Point
I just found out a workshop specialize in k cars, they have a yrv turbo kelisa, allow me to test drive If I want. Won't be cheap. Engine alone cost 3-4K, labour give it 1K+. Exhaust system they can do as well. So should be total at least around RM7K not yet include wear and tear of the half cut engine.

Rear brakes I ask before. Not recommended to change to rear disc brake. Handbrake might not be strong enough after that.
wonder is there any myvi k3-ve n/a available in the market, if got what will the price be??
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Sep 17, 2008
20,673
3,998
1,713
wonder is there any myvi k3-ve n/a available in the market, if got what will the price be??
Shouldn't be more expensive thant K3VET gua...check mudah and see. Should be 4K+ also. Price around there la. YRV price range

Not from Myvi but from Passo Racy.
 

4gbanger

1,500 RPM
Jun 26, 2013
1,958
386
683
Johor/ShahAlam
actually k3vet price are decreasing recently.. the k3ve2 prices hikes up... k3vet market is around 3.8k n the k3ve2 is about the same.. but k3ve should be lower.. just went for eye wash at kedai potong on last saturday..
 

Supra_Fanatics

Beyond 20,000 RPM!
Senior Member
Sep 17, 2008
20,673
3,998
1,713
actually k3vet price are decreasing recently.. the k3ve2 prices hikes up... k3vet market is around 3.8k n the k3ve2 is about the same.. but k3ve should be lower.. just went for eye wash at kedai potong on last saturday..
but k3ve2 parts are harder to source right?
 

twistedichc

2,000 RPM
Jan 22, 2013
2,930
255
683
Ampang Point
actually k3vet price are decreasing recently.. the k3ve2 prices hikes up... k3vet market is around 3.8k n the k3ve2 is about the same.. but k3ve should be lower.. just went for eye wash at kedai potong on last saturday..
aiyahh do no u wanna go there, got any eyes on ej-de @ not:bawling: could be minimizing stock coz afraid 12y policies so gonna be @ cost prize
 

Random Post Every 5 Minutes

Hi guys,
my engine needs to be over hauled and since i'm going to, I was thinking of increasing the c.c to 2.4. The usual way is to stroke up. Buy a 4G64, use the block and crank, change the pistons. However, to use a 4G64 block, I'll have to send for JPJ approval right? Any problems there? A friend of mine who drives an E3 says that it's not nessesary to change block, in fact it's better to just use the crank and get custom forged pistons that are shorter. Is it really possible to do that &...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience