ZTH KuChiNG zone

[series5401]

the dcnf will give good fuel efficiency provided it is tuned properly

with both opening at the same time, response is good, and u only need to press really lightly to get maintain the cruising of the car; this is where u get ur good fuel consumption, ive used dcnf before, fuel consumption is quite similar to stock carburettor, the dcnf is a very good daily carb, provided u get it done right

---------- Post added at 11:53 PM ---------- 6 hour anti-bump limit - Previous post was at 11:54 PM ----------

the dcnf will give good fuel efficiency provided it is tuned properly

with both opening at the same time, response is good, and u only need to press really lightly to get maintain the cruising of the car; this is where u get ur good fuel consumption, ive used dcnf before, fuel consumption is quite similar to stock carburettor, the dcnf is a very good daily carb, provided u get it done right

btw, if im not mistaken, the 32/36 can be set.. the lifter of the choke can be set if im not mistaken.. i just see, but not yet tested it as got no time to open and operate.. eheheee..

 

[tofu_manic]

sorry fellow kuchingites, this thread has become a carb thread haha

erm i mnot sure about that, u can try and see how it works out for u

 

[series5401]

yup bro i'm frm kch....
Address: NO.18, SL 714, MUARA TABUAN LIGHT INDUSTRIAL PARK, OFF JALAN SETIA RAJA,
93350 KUCHING, SARAWAK, MALAYSIA.
TEL: 082-361804
FAX: 082-362452

i only can get this frm net hope this can help u bro hehe

tankiu so much.. eheheeee..

---------- Post added at 04:42 AM ---------- 6 hour anti-bump limit - Previous post was at 04:40 AM ----------

sorry for the carb things in this post.. ahahahaaa..
wrong tread..

 

[series5401]

to all zth kuching, if anybody knows on a silver waja, qkq9070 just let me know.. "she" had put 2 cars accident and had ran away..

thank you..

 

[qku5881]

hi guys..where can i find lenso wheel in kuching..got recommendation..thanks

 

[series5401]

hi guys..where can i find lenso wheel in kuching..got recommendation..thanks

saw lenso wheel at falken astana.. but not many design available there..

 

[my_zyen]

sorry to interrupt guys..
can anyone tell me any good recond car shop at kch :)
thx yah!

 

[series5401]

sorry to interrupt guys..
can anyone tell me any good recond car shop at kch :)
thx yah!

looking for engine bro?

 

[my_zyen]

looking for car bro =)

 

[series5401]

looking for car bro =)

oke.. ill ask my frens later.. later ill inform u..

 

[my_zyen]

hehe...thanks bro..anyone else got good info where to find recond car also can share²

 

[rex79gt]

recommended recond car shop
tan brother

car may b pricey there but most of their cars r in very good condition and quality

 

[my_zyen]

tan brother??
can u help me to get their contact number??
since im not from kch =)
mayb i can give them a call..

 

[series5401]

to all zth member, there will be an autoshow in unimas, going to be held in 2 weeks time.... if your interested and want to participate, pls pm me..

 

[peterj]

who using waja,satria neo,persona or gen 2 wanna change engine, pls pm me for info, my mivec ck(already 1.8) with lsd gearbox selling cheap

 

[evilvtecdohc81]

hi all.... lama x masuk zth hehe.. wher evox2??anyone hv his phone no??his red monster also not on the road around town now.. where he go aa?dubai aa... heheh

 

[my_zyen]

to all brother here...i wanna ask something..
IF i bought semenanjung car....can i change the plat no to sarawak no??
anyone had an experience like this??

 

[evo3]

EvoX2 not mistaken migrated to Aussie liaw. :) His red monster are sold to mt frend's used car shop and sold also already. Not mistaken his 3 series is also there but k not comfirm as modified 3 series always look more or less the same with M sport kits.

Myzen, can....just go to motorbike shop, get a number around rm1k plus, then puspakom, kaw tim....

 

[ACQ2305]

to all brother here...i wanna ask something..
IF i bought semenanjung car....can i change the plat no to sarawak no??
anyone had an experience like this??

yeapit is possible,..had mine done a few months back..plate ACQ..Perak Reg..now Sarawak.. Proud to be a Sarawakian...hehehee.. total cost,almost rm1.5K.. didnt want to go thru d longs process of waiting,running up n dwn,so just let an agent do everything 4 me..had to pay more,thats d only catch...

 

[shah5755]

ai bro i didn't know tat u hv change ur cars reg no