X-Power

Status
Not open for further replies.

h0tTy

Known Member
Senior Member
Joined
Mar 30, 2006
Messages
202
Points
1,516
x-power.jpg


How does it work?

A normal ignition coil inherently generates back electromotive force (*1back EMF) during operation.
This back EMF negatively affects the ignition device inside the coil, decreases plug voltage, and negatively affects plug efficiency. With this problem, voltage not only becomes unstable but also produces ignition time lag in the next ignition cycle.

X-POWER works by absorbing all back EMF, which aids to improve lag voltage and promote complete combustion by producing 100% coil efficiency. Furthermore, X-POWER eliminates any ignition performance loss due to decreased electrical current under heavy throttle.


*1 Back electromotive force refers to electricity that flows in the opposite direction from the coil immediately after ignition.
*Actual results may vary depending on the vehicle and its condition.

Effect

chart1.gif


-Increased engine response
-Improved fuel efficiency
-Improved startability
-Increased torque
-Reliable ignition-spark throughout the entire rev range
-Reduce emission and stabilized idling

*The effect written above may be different for each vehicle depending on its condition.

chart2.gif


After ignition (1), ignition energy is stronger as the line (2) becomes more vertical.

Back EMF is eliminated [after installing X-POWER] even though back EMF occurs in [NORMAL].

There is more energy loss as the current waveform falls into distortion at the primary coil. In the [NORMAL] state, the ignition energy is lost.

On the contrary, the waveform is stable in the state of [after installing X-POWER].

Installation

・Simple connection between ignition coil and stock hamess with a vehicle-specific harness adapter.
・Installing the main unit in the vehicle by using a multipurose bracket and double-side tape.
・The product comes with slowly flashing LED (X-POWER start check function) by tuming the ignition ON.

installation.gif


products.gif


Q&A

1) does it support N/A car?
YES

2) the adaptor to spark cabling is universal or have unique adaptor for each car model?
Car specific - please refer to http://www.sun-auto.co.jp/english/pdf/xpower_list_0505.pdf

3) what is the increasement of HP normally will be if attach to N/A car?
10-15HP for N/A, 15-25HP for Turbo

4) come with 1 year warranty as well?
YES

5) ordinary spark plug can support xPower or need to use iradium plug?
Ordinary sparks will do

6) can it support diesel car as well?
YES

Price : RM 1480
Color : Red & Blue
Deposite : RM 400
Delivery : 1 or 2 Weeks
 
Price above included Xpower harness adaptor. please drop down ur engine model or car model.
 
increase ur HP by X-power. Simple and Easy...
 
h0tTy said:
which year is ur car?

do u have the engine model? actually i got a pdf file which is come with engine model
 
X-Power....... give u HP without modification
 
great! Must have ignition coil... :(

Would be great if a dyno chart of an everyday car can be provided.
 
Last edited:
c-ground said:
great! Must have ignition coil... :(

Would be great if a dyno chart of an everyday car can be provided.

what car u r using?
 
c-ground said:
great! Must have ignition coil... :(

Would be great if a dyno chart of an everyday car can be provided.

ur car dont have ignition coil?
 
ignition coil
Transformer that is an essential part of a petrol engine's ignition system. It consists of two wire coils wound around an iron core. The primary coil, which is connected to the car battery, has only a few turns. The secondary coil, connected via the distributor to the spark plugs, has many turns. The coil takes in a low voltage (usually 12 volts) from the battery and transforms it to a high voltage (about 15,000–20,000 volts) to ignite the engine.

When the engine is running, the battery current is periodically interrupted by means of the contact breaker in the distributor. The collapsing current in the primary coil induces a current in the secondary coil, a phenomenon known as electromagnetic induction. The induced current in the secondary coil is at very high voltage, typically about 15,000–20,000 volts. This passes to the spark plugs to create sparks.
 
c-ground said:
i mean.. how about intergrated coil?

actually wat u mean by intergrated coil? the x-power connect to ignition coil then come with a special adaptor that connect to your stock harness adaptor.
 
peter liew said:
peter here 012-9858377
Nissan Cefiro 3.0 V6

peter.. is ur engine VQ30DET which come with 6 cylinders? the price for this x-power is actually for 4 cylinder engine. the x-power for 6 cylinder engine will be more expensive. i will get u the price for x-power for 6 cylinder engine.
 
c-ground said:
nevermind...

maybe i can help u to answer ur question. if can't i try to get the answer from supplier ok? do feel comfortable.. :)
 
peter liew said:
peter here 012-9858377
Nissan Cefiro 3.0 V6

Hi Peter, the Xpower for 6 Cylinder engine will be RM 1,580 included delivery charges. please call me at 012-229 6228 if u wish to purchase it. thanks.
 
powered your car with X-Power......unbelievable experience..
 
Status
Not open for further replies.

Similar threads

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience