1.GM 2 Bar Map Sensor-i've been using this map sensor boosted to 1.3bar.This Map sensor works great on my vtec engine,dont compare with haltech or microtech map sensor,some of them doesn't work with honda engine,only if u using a Stand Alone Ecu.This is a well-known branded map sensor on ebay.Selling RM380 (nego).
2.BOV-this is x-avion Hks design type 2 bov.(BUT modified with Original HKS Valve & Fin.which makes the bov sound like a truly Original Hks SSQV.And also a dual stage pull type Bov.there's also an adjustable spring.This item is scratchless,Like New) selling RM300.
3.450cc Fuel Injectors-This is a VR4 2.0 Turbo Injectors.Selling RM250.
4.PR3 Ecu Chip-This chip is is great for turbo setup.No need buy a Stand Alone Ecu wasting RM3000-4000.This chip's Fuel Map is good and have Enough Fuel to boost to 1.3bar I'm using it on my b16a for about 2 years & a half already.This is an Australian tuners.This Chip's program is imported and Re-Copied in Malaysia.But make sure u are using B16A 1600cc & 450cc Injectors.Selling RM300.
5.Wastegate 38mm-This is a Monsta Australian made wastegate.Selling RM350. http://www.geocities.com/yii_honda/Picture4.jpg
6.Spark Plug-OEM Splitfire 8.For Turbo cars.selling RM150
7.Turbo Manifold-This b16a turbo Manifold is suitable for drag race use(with External Wastegate type setup).see to believe http://www.geocities.com/yii_honda/topshot.JPG selling RM700 (nego) This picture is old.Now the wategate flange fits the tial 38mm type.
8.Engine Kosong with Added 3 pieces head gasket(Ready To Boost).Type R valve springs & retainers,and upgraded with KING engine bearing set.this engine can safety going for 8800-9000RPM.All in very good condition.Selling 2300(nego)
9.4.4 Small Vtec Gear Box/W Full Race Clutch Kit.Still in Good Condition.http://www.geocities.com/yii_honda/Clutch.JPG Selling RM1800(Nego)
If u guys Planning to build a b16a Turbo,i can sell u this whole set engine boosted to 1.3bar Guaranteed SAFE!This is a running engine.selling RM6300 Complete with wiring set & ecu & Many Many Extras(Hi-low Boost Switch like Nos Switch..Oil Catch Tank..Fuel Pump..Hks Boost Gauge...)Thanks For viewing~ Have A NicE DaY!!
2.BOV-this is x-avion Hks design type 2 bov.(BUT modified with Original HKS Valve & Fin.which makes the bov sound like a truly Original Hks SSQV.And also a dual stage pull type Bov.there's also an adjustable spring.This item is scratchless,Like New) selling RM300.
3.450cc Fuel Injectors-This is a VR4 2.0 Turbo Injectors.Selling RM250.
4.PR3 Ecu Chip-This chip is is great for turbo setup.No need buy a Stand Alone Ecu wasting RM3000-4000.This chip's Fuel Map is good and have Enough Fuel to boost to 1.3bar I'm using it on my b16a for about 2 years & a half already.This is an Australian tuners.This Chip's program is imported and Re-Copied in Malaysia.But make sure u are using B16A 1600cc & 450cc Injectors.Selling RM300.
5.Wastegate 38mm-This is a Monsta Australian made wastegate.Selling RM350. http://www.geocities.com/yii_honda/Picture4.jpg
6.Spark Plug-OEM Splitfire 8.For Turbo cars.selling RM150
7.Turbo Manifold-This b16a turbo Manifold is suitable for drag race use(with External Wastegate type setup).see to believe http://www.geocities.com/yii_honda/topshot.JPG selling RM700 (nego) This picture is old.Now the wategate flange fits the tial 38mm type.
8.Engine Kosong with Added 3 pieces head gasket(Ready To Boost).Type R valve springs & retainers,and upgraded with KING engine bearing set.this engine can safety going for 8800-9000RPM.All in very good condition.Selling 2300(nego)
9.4.4 Small Vtec Gear Box/W Full Race Clutch Kit.Still in Good Condition.http://www.geocities.com/yii_honda/Clutch.JPG Selling RM1800(Nego)
If u guys Planning to build a b16a Turbo,i can sell u this whole set engine boosted to 1.3bar Guaranteed SAFE!This is a running engine.selling RM6300 Complete with wiring set & ecu & Many Many Extras(Hi-low Boost Switch like Nos Switch..Oil Catch Tank..Fuel Pump..Hks Boost Gauge...)Thanks For viewing~ Have A NicE DaY!!
