mines998
1,000 RPM
Does any sifu know what is the standard engine compression for 6A12TT turbo? I was tired to find on Internet but I only got for the NA.
^pomen_GTR^ said:i got it in wikipedia
* Engine type — V type 6 cylinder DOHC 24 valve
* Compression ratio — 8.5:1
* Fuel system — ECI multi
* Peak power — 177 kW (241 PS; 237 hp) at 6000 rpm
* Peak torque — 309 N·m (228 lb·ft) at 4000 rpm
*more detailed spec.
6A12TT
MANUAL SPEC
Displacement, cc 1998
Engine model 6A12T (twin turbo intercooler)
Max.power (Net), kw(PS)/rpm 240 ps (176.52 kw) / 6000 rpm
Max.torque(Net), N*m(kg*m)/rpm 31.5 kg*m (308.91 N*m) / 3500 rpm
Power density 5.96
Engine type V type 6 cylinderDOHC24 valve IC twin turbo
Engine information
Fuel system ECI-MULTI (electrically controlled gasoline injection)
Turbocharger Twin Turbo with intercooler
Fuel type Unleaded premium gasoline
LEV system (Low emission vehicle) No
Compression ratio 8.5
Bore, mm 78.4
Stroke, mm 69
Final gear ratio
Fuel consumption at 10-15 modes, l/100km 9.8
Fuel consumption at 60 km/h, l/100km
DanzEterna said:not sure, but u have to change to ARP studs. cos 1.2mm is kinda thick.
^pomen_GTR^ said:to check your CR after using thicker gasket then your mechanic need to do some measurement...
before using this online calculator:: Engine Size and Compression Calculator