Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Izso" data-source="post: 1064482485" data-attributes="member: 2429">Having said that - all the modders that drove Wiras no longer drive wiras. I wouldn't say what I learnt is hard - just expensive. I didn't want to just change the engine to a Mivec or GSR and be done with it. People just Justin Merrill in America have psychotic drag 4G15 machines that need a wastegate for idling cuz the supercharger runs at 0.8 bar pressure on idle. People like Justin are the true mad fellas. 1. Yes it is. Remove the head and the piston tops are revealed lor. 2. Degreaser, a brush and a high pressure water hose. Or just use diesel to wash your engine. Just remember to rinse it well after washing. 3. higher compression will just mean higher power to some extent. Yes - more heat too. But all depends on how much you go. Even if you fully skim your head to the max it won't do anything too drastic other than sometimes knock at high revs if you're using low octane petrol. If you're talking about high compression pistons and skimming, then you better hope your ECU can adapt otherwise you might need to use high octane petrol already.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front bumper set ~M5 kidney grille...
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Adjustable shock absorber

Option1: TEIN Street Basic Damber (RM3000)
Ride height adjustable, Hi & low

Option2: DD Drag N Drift (RM2500)
Ride height adjustable, W pillow ball mount, 40 Soft hard

What is your choice and why?

Bangkok International Motorshow 2007 Thailand Cars and Girls. Part 1

[IMG alt="Bangkok Motorshow...

E-manage firmware 1.49 & VTEC Engagement

Have anybody tried the E-manage Blue firmware 1.49?
I have tried it and it screwed up my VTEC Engagement. Anybody has an explanation on this. I had to resort to down grade it back to version firmware 1.11

How to...