Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="sakuraguy" data-source="post: 1656448" data-attributes="member: 6441">Trailing ArmA trailing-arm suspension is an automobile suspension design in which one or more arms (or "links") are connected between (and perpendicular to) the axle and the chassis. Simple trailing-arm designs in live axle setups often use just two or three links and a Panhard rod to locate the wheel laterally.A semi-trailing arm suspension is an independent rear suspension system for automobiles in which each wheel hub is located only by a large, roughly triangular arm that pivots at two points. Viewed from the top, the line formed by the two pivots is somewhere between parallel and perpendicular to the car's longitudinal axis; it is generally parallel to the ground.Trailing-arm and multilink suspension designs are much more commonly used for the rear wheels of a vehicle where they can allow for a flatter floor and more cargo room. Many small vehicles feature a MacPherson strut front suspension and trailing-arm rear axle.</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Garage Sales for Altezza Stuff at Trial Tuning @ Riyoz Racing

I have talk to William and convinced him to have a garage sales for spare and performance parts for Altezza...most probably in mid July'10.

There will be parts like halfcut, gearbox, sport suspension, Modellista...

Ca18 Turbo

I need some help from Nissan people here,

I read from someone's posting that the CA18DETT uses ball bearing turbo.

Really keen on this turbo for my project.

as far as I know Garrett t25's (oil bush type) are used...

Evo 3 Boost Standard

got the boost meter fixed ,
the gauge shows -0.8 when idle the car
when boosting first gear , second and all
boost goes to 0.5 only.
does this mean a leakage or its standard ?
thanks people :)