Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="KoichiImpul33" data-source="post: 1794702" data-attributes="member: 26411">350z slower than B18C?Bro, no offense but I think it pretty much depends how you tweak the engine. If you mess up the Haltech mapping, you will end up losing power instead. Btw, not all engines perform well under Haltech. dun believe me? check out some forums, especially U.S and OZ forums on Evo, you will find that Motec works better than Haltech on Evos. I had a fully tweaked eg6 which was proven to be faster than my 350Z, but I had performance parts all over, from the enlarged EK9 trottle body all the way to the border 304. I guess its not fair to compare that way cos the mods are not the same. You should compare a standard DC type R with a standard 350Z. I would agree that the 1st few gears the Z might be slightly behind but once it hits midrange it should be able to catch up and overtake. A good 350 meters could prove this right. the VQ35 engine has high midrange torque. I have tried a standard EP3 when it was 1st launched many many years ago, didnt really feel the power, i guess the same would apply to a slightly heavier DC5R.</blockquote>

Verification

The Marketplace Latest

original rare Black Racing Pro N1 16x6.5jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37SL Black Edition...
- Started by david tao
- Chassis and Wheels
Honda city JSracing gtwing spoiler
- Started by jeff6126
- Exterior and Body
Honda civic fd ~car spray(Ferrari red)
- Started by jeff6126
- Exterior and Body
Honda jazz fit gk flrs body kit
- Started by jeff6126
- Exterior and Body
BMW F10 ~M5 front skirt lip with glossy black
- Started by jeff6126
- Exterior and Body
Kia Forte gtwing spoiler
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Proton Saga VVT Evo Front Bonnet Hood
- Started by jeff6126
- Exterior and Body
Perodua bezza gear up body kit/spoiler
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Peugeot 408 Launch Due Next Week!

Nasim Sdn Bhd, the official distributor of the Peugeot brand in Malaysia, has indicated that they have ear-marked next...

S16?!

:retarded:

4g93p MMC ECU

Hi all,
Need to check if the SGTI mmc ecu is a learning ecu? as i am have a unichip on it and recently i find that the bottom end like flooded very hard to take off. wat could be wrong?