Show us your Mitsubishi Airtrek pictures...

[stutzedward]

can we remain the tmic for install td05? and our stock td04 is which series?td04L?
which td05 series is more better?

I have seen Airtreks using TMIC with TD05. I don't think the setup is optimum because TD05 pumps more air than TD04, hence the small TMIC surface is not sufficient enough to cool the air before it reaches in manifold. Having that said, you can still use this setup.

Stock Airtrek turbo is TD04. If I am not mistaken, it is TD04HL-15T-7

I am using Evo 7 TD05. Turbo lag is very apparent. If you want response, this is not the one to go with.

I heard that best setup is TD05 from Evo 9 as it's titanium turbo spins quicker with less enertia, hence less turbo lag. Alternatively, I heard Evo 7 GTA TD05 and TD05 from Evo 4/5/6 fits Airtrek better too as it's slightly smaller.

 

[vr2turbo]

I remember when my turbine failed, I went to see Tong turbo. They mention can custom make twin blades, something like that for me, but in the end since my casing also cracked I opt to get a chop shop unit.....

 

[biao]

I have seen Airtreks using TMIC with TD05. I don't think the setup is optimum because TD05 pumps more air than TD04, hence the small TMIC surface is not sufficient enough to cool the air before it reaches in manifold. Having that said, you can still use this setup.

Stock Airtrek turbo is TD04. If I am not mistaken, it is TD04HL-15T-7

I am using Evo 7 TD05. Turbo lag is very apparent. If you want response, this is not the one to go with.

I heard that best setup is TD05 from Evo 9 as it's titanium turbo spins quicker with less enertia, hence less turbo lag. Alternatively, I heard Evo 7 GTA TD05 and TD05 from Evo 4/5/6 fits Airtrek better too as it's slightly smaller.

oic...so the fan no need move to front after install td05? do you have install the fan ,now in the market call high speed radiator fan?

 

[stutzedward]

The fan needs to be modified and moved slightly to accomodate the bigger TD05

 

[Kc84]

Bro stutzedward, are you on evo 7 TD05HR or HRA? nozzle size 9.8 or 10.5T?

 

[stutzedward]

If I am not mistaken, it was TD05HR-16G6-9.8T

 

[Kc84]

Got it, thanks. I'm deciding between the HRA -9.8T from E7 or HR 9.0T from GTA. both got pros and cons.....

 

[stutzedward]

Got it, thanks. I'm deciding between the HRA -9.8T from E7 or HR 9.0T from GTA. both got pros and cons.....

For our automatic gearboxed Airtrek, go for GTA turbo. It is more suitable as it has lesser turbo enertia, hence lesser turbo lag. During take offs, we cannot rev like manual to build the boost, so TD05 from Evo 7 manual is less stuitable.

 

[Kc84]

Thanks bro, GTA tough one to find in good condition. Viewed 2 units past 2 weekends, both had too much shaft play.....:hmpf:

 

[Kc84]

Reviving the post! Here are some pics of my trek.... Fogging the car after collecting from dealer.

 

[james3399]

E9 td05 the best bro~~~just go for e9 td05 u will not regrets~~~im using it now ~~spooling fast compare v my last setup[evo 4] turbo~~

 

[visvim96]

Hi guys, newbie here.
03' black airtrek turbo.
Still stock unmolested. kekekekeke


Just had an accident with my trek last night, sedih gile!! :frown: Driver side headlight and bumper kena, gonna find replacement soon. Any recommended workshops? I'm from Kl btw, old klang road area. I found someone selling the headlights for RM700 half cut still good condition, maybe a polish it will be good. Secondly, the bumper is the one I'm looking for now. Anyone has one laying around for sale? gonna repaint the whole car afterwards.

silver or white?

After this, I'm thinking to start my project airtrekT "stage 0" haha. Currently searching for Tein super street, wheels and bbk. I've been thinking of te37sl but its a little out of budget lah, or re30, both are my dreams hehe. Then bbk, then slowly only go onto performance.

 

[4gbanger]

there's one halfcut owner at puchong.. u can search his contact at mudah.my - man bluebird..

and one decent tips here bro.. makesure u do regular maintainance first instead of going for performance. if not you're gonna suffer alot more budget that it should be.. after all the maintainance went well and smooth, then u can start going for performance.. makesure your gear oil, all the oil seals and belts in good shape.. bbk is also a good start before going 300 whp. alot of other choice instead of brembo.. our stock turbo manifold are vulnerable to crack.. if u r planning to plonk a evo TD05hr turbo, makesure all other supporting parts ready as well. such as injectors, fuel pump, and camshaft. and please start with evo camshaft first. its a pnp =)

 

[visvim96]

there's one halfcut owner at puchong.. u can search his contact at mudah.my - man bluebird..

and one decent tips here bro.. makesure u do regular maintainance first instead of going for performance. if not you're gonna suffer alot more budget that it should be.. after all the maintainance went well and smooth, then u can start going for performance.. makesure your gear oil, all the oil seals and belts in good shape.. bbk is also a good start before going 300 whp. alot of other choice instead of brembo.. our stock turbo manifold are vulnerable to crack.. if u r planning to plonk a evo TD05hr turbo, makesure all other supporting parts ready as well. such as injectors, fuel pump, and camshaft. and please start with evo camshaft first. its a pnp =)

Thanks for the tips man!! planning on going to ah wah's workshop soon, never been there cuz normally I would just bring my car to the nearby workshop around my place which is garage-cruise power for normal maintenance. Also specialised in Evos.

Is that half cut shop nearby ah wah's?

 

[stutzedward]

visvim96, you can try Ah Wah's shop as it's very near your area. Just Banda Kinrara.

Agreed with what 4gbanger said, make sure your car is healthy before starting to pump up the performance.

... and welcome to the forum.

 

[visvim96]

visvim96, you can try Ah Wah's shop as it's very near your area. Just Banda Kinrara.

Agreed with what 4gbanger said, make sure your car is healthy before starting to pump up the performance.

... and welcome to the forum.

thank you thank you was thinking to sell off the car last year but at the end pun tak jadi, trade in price was too low.

What do you guys think about this colour?

 

[4gbanger]

nice.. blue mica is it?

 

[visvim96]

nice.. blue mica is it?

Not sure what name of this blue, my friend told me airtrek turbo new batch came in this colour too. Even evos hmmm.

Do you guys know there is one shop in puchong permai if I'm not mistaken that sells airtrek parts? Or somewhere in puchong. My friend told me It is famous known for airtrek half cut/used parts but he can't remember the exact location.

Would like to pay them a visit if theres any front bumper for sale.

 

[vr2turbo]

Not sure what name of this blue, my friend told me airtrek turbo new batch came in this colour too. Even evos hmmm.

But looks like Scooby dy.....Blue with gold rims.....

 

[4gbanger]

i know that guy.. its man bluebird.. he's actually new to airtrek but he's a halfcut owner and he drives airtrek. cut the long story short, he searching parts for his car later decided to bought the whole hafcut and sells it..