Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="ABV9750" data-source="post: 1840144" data-attributes="member: 9375">personally i prefer GT spring front and rear for gti moded engine due to its 20% more stiffness that GL.but if you plan for comfort ride, GL spring would be a better choice. std spring with Tuv, Ansi, JIS etc certificate ensure a lifespan within the weight range but we dunno the previous owner usage. local made spring is usually unexpectable due to no test certificate.if lucky then you got it a good shape but normally it will last for few years only.in our case, 4 doors GL is a light weight car thus a normal spring is still under range except for low down car profile with soft damper.if you need a better handling, then consider a gas loaded damper and for 4 doors, install the rear sway bar.</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

psst-Porosaki's monster is hatching

Rumour???? another new 1JZ tezza hatching -manual some more :adore:

more the merrier

Wta: Eletronic absorber

Hi guys !
Do anyone know what brand of Eletronic absorber is the most comfort ? Need some suggestion .. Thanks guys !! =) :driver:

Tuning 4g93 Eterna mmc ecu without socket

I convert my 1.3 inj satria with 4g93 Eterna.The problem is there is no socket to connect the ecu directly to tuner device.Anybody have the experience tuning this ecu without socket?Plz help me.I was asked some...