Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Dinesh" data-source="post: 4475472" data-attributes="member: 40303">http://www.zerotohundred.com/?attachment_id=14913Tuning companies tend not to focus on a specific make in producing their kits or packages so as to appeal to a wider target market. Of course there are a select few that choose to concentrate on a specific make to provide more quality offerings to their customers.http://www.zerotohundred.com/?attachment_id=14914One such tuning house is PPI Automotive Design that solely adds their touch to the cars with the four rings on their grille. That said, it’s no surprise that PPI cars are always a step above the rest.http://www.zerotohundred.com/?attachment_id=14915Now, the Audi-exclusive tuner has announced plans to build just 10 units of their Audi R8 based Razor GTR-10. It may be visually similar to the previous Razor GTR, but the only parts shared are the front hood, front bumper and rear diffuser. Everything else has been redesigned.http://www.zerotohundred.com/?attachment_id=14916Motivation is provided by the V10 engine with some slight upgrades. A roof mounted ram air-intake system helps it breathe easier while a sports exhaust aids in venting spent gasses. Finishing things up is a remap of the ignition mapping. Final figures stand at 601hp and 565Nm of torque, almost a hundred horsepower over the factory figures.http://www.zerotohundred.com/?attachment_id=14917Exterior wise, the redesigned body kit has been wind tunnel tested and is constructed of carbon fiber. It’s functional in cooling as well, directing cool air to the engine oil cooler and brakes. The generous use of carbon fiber around the body has lead to a weight saving of 250kg.http://www.zerotohundred.com/?attachment_id=14918Adding all those figures up, the power combined with the weight saving and the modified R-Tronic transmission deals the century sprint in 3.2-seconds and onto a top speed of 335km/h.http://www.zerotohundred.com/?attachment_id=14919Keeping weight down further are the Mag11 Forged Aluminium PPI wheels that measure 19x9 at the front and 20x12 at the rear. Tyres are non other than Michelin Pilot Sport 2 lining up 245/35 at the front and 325/25 for the rear.http://www.zerotohundred.com/?attachment_id=14920Stopping power is provided courtesy of six-piston calipers on the front chomping on 380mm rotors and 356mm for the back. Of course, Audi’s very own Carbon Ceramic Brake System is available but PPI have their own higher friction brake pads for more bite.http://www.zerotohundred.com/?attachment_id=14921Handling is handled by a KW coilover kit. Road bumps can be dealt with by PPI’s hydraulic lift system that can give the car an extra 45mm of lift if the need arises.http://www.zerotohundred.com/?attachment_id=14922Ultra exclusivity is the name of the game, and with only 10 units to be made, each one is identified by an aluminium plaque framed in carbon fiber with the serial number.http://www.zerotohundred.com/?attachment_id=14923Source: http://worldcarfans.com</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Tyre specifications according to rim

Would like to know what kind of low-profile tyres to get for rims roughly by size of 17x7?

And why is it that most people complain its hard to get 17" tyres?

Submitting some pictures for viewing will be a bonus...

How's this possible?

over saw this while in google'ing

we seen veilside changed the rx7 look totally different with fortune kit, how about this?
it says "is built around an old Mazda RX-7 FD chassis" , can it really be made ? the body...

Part 2: A1 Grand Prix Malaysia 2007 - Saturday