Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="lkc" data-source="post: 4327130" data-attributes="member: 89363">bro,i am also driving proton persona iafm auto old version,the problem with the old batch persona as below - 1.steering always cannot straight 1 even after done alignment ( bush problem )2.whenever you pump petrol,the needle won't go up till the top ( fuel pump problem )3.when drive through uneven road got sound like metal hitting something ( problem still not solve as many ppl tried and got post this problem b4,but for my car the sound gone after some time )4.fuel cover leg broken and the clip fall off ( nowadays if u really see on the road,alot of persona fuel cover is black color,reason is they went back to claim the whole cover but only black color available,if same car color have to wait almost 1 week,i changed mine b4,they sprayed the color not so same as my car 1,lighter color.5.when the car drive until 100km the pedal there got vibrate,felt quite uneasy also but after i changed the aftermarket lighten crank pulley - problem solve,dunno what is the problem also.6.Rear boot can't open with key,after i went to sc and complaint,they fixed it for me.7.When on aircond got sound so far all the problem above is what i am facing b4 in past persona,only problem num 1 not solve yet,i also very boring dy go to sc here and there to claim waranty,then have to wait also,my car also pay 9 years 1,at first i also thought the car very good,after drive for some time,the car is bullshit,no pick up,body very heavy and quality sucks,a bit better than gen-2 only,then i piss off,since things already happens and i got the car,i start to mod it,after modding it,my petrol even better than b4,my pick up much more better than standard persona,can ditch 1 1/2 car if race with standard persona,btw,if you want to claim warranty or service your car,dun go to the 1 located near kesas highway,big only the place but they do work no pro,go to glenmarie proton edar or those small shop near your place even better,if you plan to still drive this car,i suggest u change the extractor to 4-2-1,then add bullet and change muffler,change drop in air filter,change ligten crank pulley,cam pulley and change your tyre size to 195 / 55 then your ride will be much more better and petrol also save.</blockquote>

Verification

The Marketplace Latest

original FD2R akagakiracing titanium 2.75” exhaust...
- Started by david tao
- Engine and Performance
original GT86 BRZ akagakiracing titanium 2.5”...
- Started by david tao
- Engine and Performance
2pcs only, original rare spec Rays Volk Racing CE28...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RZ 18x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare spec Rays Volk Racing CE28 16x7jj...
- Started by david tao
- Chassis and Wheels
Honda CITY 1.5 E (A)
- Started by PIstonHeads
- Cars for sale
original BBS RE013 18x8jj offset +50 5H pcd 5x112...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels

Posts refresh every 5 minutes

Dreaded Steering Wheel Vibrations at High Speed

Dear All,

I have been pursuing a dreaded steering wheel vibrations on faster than average speed (85 ++ km/h). My rims setup for the BMW E46 1JZ is BMW OEM 166 style but its a good replica from Taiwan, owner revealed...

How long have you owned your Altezza.. Survey

Just for fun...want to find out how long u had your Altezza. Current owners.... and dont care if engine changed :rofl:

1) 2000 = 12 Years :1JZtezza
2) 2001 = 11 Years : mainmukit
3) 2003 = 9 Years : Maimizan Bahrim...

GSR ECU & Gti ECU

hey u guys put there....

1 of my fren would like to know the following questions...he is driving a Gti 1.8 DOHC n would like to bolt on a GSR turbo to his engine...

1. would a GSR 5663/7377 ECU can be plugged in...