Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="csl" data-source="post: 1063470430" data-attributes="member: 16966">As what I expected since the beginning.1st of all, you need to understand what is risk. To be more down to earth, risk is basically the chance of sht happen. Damage is the sht happen. Due to wrong use of the wording, things can be 180 degree turned and become another story. That had mislead a lot of people.What type of risk we will need to face when there is a nuclear plant? Example: Nuclear core explode. What will be the damage? Answer: Every life form within certain area will die or suffer from radiation and the radio active effect will last for long time within the radius of effected area which will cause most life form unable to live there. I believe these 2 things are the only things that most Malaysians knows and the only thing what appear in their mind is: Nuclear plant will definitely explode and we all gonna die. Nothing more that that.I don't blame the rakyat because they never have a chance to learn about control, management, risk assessment, and etc. Those who born with such instinct or talent, had been washed out by their greedy bosses when they tried to do something good end up with kena blasted because of wasting money and time. Part of the culture. No hope. Here goes why plenty of people don't like china product and Malaysians are basically towards that direction.Back to the topic.When you think nuclear plant has a potential for creating a man made disaster, do you also think about what is the high potential and not like gonna happen type of root cause and the possible solution for them? If you don't think and straight away deny of its existence, here goes our future and I should consider to migrate to some other countries which have majority people who know how to think before making their stands clear. I can't blame our parliament YBs are such a bunch of fools because they need to debate like a fools to get the foolish people support. Just like those who talk about human rights in Gaddafi's parliament will eventually being wipe off outside the building by the foolish supporter. My purpose of making this thread is to encourage people to make a step forward to analyze a thing. Not jump off from no where and making a strong stand of banning women for wearing shorts because it will create traffic accident. We are not living in 200 BC BTW. Debating on the nuclear plant is not as important as the attitude of handling an issue. But if you would like to know about people who work in a nuclear plant, how nuclear plant works, Nuclear plant safety and etc, please google it and read from different source. As far as I know, those people who handle a very tiny volume of radio active source, they need to fulfill the requirement like professionalism, fixed neutralized schedule (including work hour), frequent medical check up, and many many more. Basically they need to have a test and obtain the license for handle the sht. On the plant building, even a bolt need to be certified. That's why when the tsunami hit japan and damage the nuclear plant cooling supply, the core won't just blow out as fast as the bomb dropped in hiroshima. They still have chance to save it from turning into a big disaster.On the management and control point of view, if need people to sacrifice their life for saving a building, that's mean it is not good enough (I called it failure). They need to implement some policy and solution for handle such issues. I would say, the recent japan nuclear plant incident had exposed the weakness and the carelessness of the management. One of the lesson learned is not building it nearby seaside to save cost, regardless it is for short or long term. And there is no mobile water pump unit which quite surprise me for an advance country like japan. I would like to know when this plant had been built and started operation. Perhaps, I should start drawing my concept and let you guys see (in few days). There is no problem to waste money on over spec engineering but when save money and walk on the engineering limit, anytime will fall down. I like to call these bastard as smart a$$. And yes, I'm the hard core bad guy as usual.---------- Post added at 03:34 PM ---------- 6 hour anti-bump limit - Previous post was at 03:25 PM ----------Sorry, things need to be corrected:1. Many people lives nearby nuclear plant without the need of vaccination, in Korea and Japan, according to the news. other countries not known.2. Certain countries does collect waste nuclear sht for recycle them and sell them back.3. Millions or ringgit is for make danger signs. Actual thing need to calculate by Billion in units.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

safc 5 button

hey olz...I'm planning to install engine management for my car but need da budget one...is safc 5 button is good enough??do help me out... :confused:

Autobahn Experience Part 1 : Audi A4 1.8 TFSI M/T rental car

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/283129_10150737294480352_902185351_20126121_7288123_n.jpg

Mein Damen und Herren (Ladies and Gentleman), I have recently returned from Germany and I have been...

what OEM O2 sensor you recommend for O2 monitoring. pls help.

Dear sir,

I bought a wrong O2 sensor for my microtech ecu and apexi O2 monitor. Before that i use a unknown 1 wire O2 sensor from chop shop but it melt due to unknown reason. After that i change another O2 sensor...