Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Acoustic" data-source="post: 126731" data-attributes="member: 728">HiKnocking ...... as mysterious as it may be - due to my limited knowledge .... is due to the fuel properties / qualities - as priority.high octane was once told to me as not more powerful, but when analyse closely, allows the slower expansion of the combustion explotion. It is actually less powerful, but more longevity friendly.regardless...... ignition mapping plays the 2nd more important role hence no amount of fuel ajustment will be able to solve this problem.fuel delivery timing, or should I say how early it spray at various RPM also affects knocking.i.e. at 1,000 RPM, it is generally set to 100 BTDC, while linearly increases to approximatelt 300 BTDC at 9,500 rpm = nearly one complete cycle advance - this is due to air-flow speed differences - the engineer who programmed the ECU will have to take into account of injector distance to combustion chamber.Hence, if you've modded the engine here and there, a little everywhere, all these things get affected......Hope this helps.Oh, you should realise by now, and I repeat, no amount of fiddling with the fuel will solve the problem....We should also consider the application of turbo, the way it uses injectors will be different from NA.i.e. turbo air flow may be more than NA, however it does not mean faster .... having a much bigger injector often means at low rev at low duty cycle the injectors shuts every quickly - if the particles were unable to follow the flow into the combustions - which always happens for all engines forced induction or NA, will suffer knocking... for reasons other than not enough fuel - right?Hmmm, I wonder did I say it right? anyway, just want to introduce the effect of the world of TIMING of various issues for your considerations. TIME DOMAIN.</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Another jerking issue...

Salam n good day for all ZTH forummers,
recently i've confront with this issue...
before this when i drive the car,the engine run smoothly..
just after i had my engine failure and changed my pistons then the issue...

Civic: Honda’s Icon of Revolution in Engineering Technology