Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="RX-J" data-source="post: 1065487" data-attributes="member: 21915">Hi Guys and Sifoos!I'm a new guy here .. I own a 1972 Mazda 1000 aka Mazda Jumbo :embaressed_smile: (previously belongs to my father) This car had gone for transplant many years ago (arround 90) .. hemm If I'm not mistaken the engine was from Mazda 808 1.3cc and the gear box still running on ori Mazda 1000 4 speed manual (back weel drive). The engine is still running smooth and I can easily reach 110km/h but the problem is all the body/chasis will shake like you're in blender machine and the stering shakes hard too oh ya one most important problem is the brake dosent work well... you have to step on the brake pedal as far as 50m before reaching the subject/last stop point! :shcokedcamo: Now I'm planning to do modification, I know it will be sets of silly questions after this but hey I'm a total 0 in car modification. :embaressed_smile: hope you sifoos here can help. (pictures attached for more understanding of this machine condition :sad_smile: )1. Can I transplant to a RX-7 13BT Rotary Engine in to this old machine? If can't is there any other alternative but as good as the 13BT power output? How much the cost of half cut for that kind of engine? 2. Can the RX-7 gear box fixed in it? What is the meaning of "firewall knocking have to be done"? What is the disadvantage of doing this.. will any problem accur in future?3. Is it true the13BT cosume lots of fuel? (minum/makan/baaragghh minyak) how many KM /litre at 110km/h (highway)? and is the engine expensive due to high maintainance?4. From your oppinion which one shall be done first... weld your entire rusted body or install the engine? 5. I've brought my car to a welder and he's asking for RM3.5K for fully weld entire rusted body and to stregthen the chasis (but he says the chasis is good) ... is there any other workshop can do for lower than that?6.What is the best spring/shock for this car?7. What braking system you suggest for this old machine? (prefer front & back disc brake)8. Which workshop is ideal for the above modification?9. Do you think this car can go more than 180km/h with above modification?Best regards,RX-J aka RX-Jumbohttp://www.gambarkahwin.com/projekrxj/1.jpghttp://www.gambarkahwin.com/projekrxj/2.jpghttp://www.gambarkahwin.com/projekrxj/3.jpghttp://www.gambarkahwin.com/projekrxj/4.jpghttp://www.gambarkahwin.com/projekrxj/5.jpghttp://www.gambarkahwin.com/projekrxj/6.jpghttp://www.gambarkahwin.com/projekrxj/7.jpghttp://www.gambarkahwin.com/projekrxj/8.jpghttp://www.gambarkahwin.com/projekrxj/9.jpghttp://www.gambarkahwin.com/projekrxj/10.jpghttp://www.gambarkahwin.com/projekrxj/11.jpghttp://www.gambarkahwin.com/projekrxj/12.jpg</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Enthusiast goes wild with his Honda S800

https://www.zerotohundred.com/wp-content/uploads/2011/05/hondas8001.jpg

This particular Japanese guy is so immensed in his Honda S800, that he decides to take awesome videos with his "bloggy" type camcorder. He...

FD3S Knock Sensor

Hi Guys,

How do U Guys consider this FD3S knock sensor condition? (the insulator seemed melted over the heat of a Rotary Engin).

1- Bad?
2- Repairable(reapply silicone sealent on the melted area)?
3- Still working...

Tuning engine timing..

My sister's kancil 850 auto, rpm during idling is roughly around 2k without turning on the a/c yet.. i think it is high right? So i'm going crazy to tuning it down n manage to get 1k, i did it but it mess up...