Looking guide to convert rear tail light evo3 for wira

[flarery]

Hai i'm new member in here...I'm looking for any guide,picture or blueprint that can help me to do rear tail light evo 3 conversion for wira......before this I went to JPJ and ask about it,and they say" yes you can do as long you not cut a chassis"...JPJ only allow you to cut a quarter panel...:proud:

 

[guest]

seriously can ah bro?wahh...i wan oso la...

 

[liz@rd]

if it's not plug and play, don't bother honestly

 

[^pomen_GTR^]

Hai i'm new member in here...I'm looking for any guide,picture or blueprint that can help me to do rear tail light evo 3 conversion for wira......before this I went to JPJ and ask about it,and they say" yes you can do as long you not cut a chassis"...JPJ only allow you to cut a quarter panel...:proud:

are u sure they mentioned tail light? not the headlight??


for the front (headlight+fender+bumper+hood) is ok because no metal cut needed...just bolt on part....


thats why the rear can't be done because need to cut the whole rear light frame......

 

[flarery]

when i ask to JPJ "boleh tak nak convert lampu belakang evo/proton pert" and they said " boleh,tapi cuma boleh potong kulit/panel sahaja dan bukan potong chassis".....That mean tulang chassis cannot cut....now day wira fully convert to evo not a big problem because many owner inspira also do the same thing,100% convert to lancer or evo10....that why I'm ask any picture,guide or blueprint that can help me with this project,seriously I never see any real evo3 boot before in front of my eyes and also heard that the real evo3 boot a little bit short that a wira...

 

[^pomen_GTR^]

yep..bonnet shorter,bumper also shorter than wira....


the evo3 bumper more like equal length of wira aeroback bumper.....


about the bonnet nowadays ppl can cut&paste the evo3 bonnet to fit wira bonnet....


so its like u were using evo3 cut&paste bonnet+evo3 rear light but stuck with normal wira bumper...can't use evo3 bumper

 

[guest]

so how now?hehehe

 

[flarery]

some reference people who success with their project ....

 

[flarery]

yep..bonnet shorter,bumper also shorter than wira....


the evo3 bumper more like equal length of wira aeroback bumper.....


about the bonnet nowadays ppl can cut&paste the evo3 bonnet to fit wira bonnet....


so its like u were using evo3 cut&paste bonnet+evo3 rear light but stuck with normal wira bumper...can't use evo3 bumper

If you said that evo3 boot a little bit shorter than wira how they can plug and play the top cover of boot on wira?? ...some of them just plug and play gsr/evo3 top cover of the boot and combine it with wira tail light reflector....:hmmmm:

 

[DracBrax]

some ppl do like this at the rear light, keep original wira light but then cut the light so it becomes a straight line at the part where it touch the number plate and then put evo 3 reflector so it still is wira light but with evo 3 reflector.

Sorry if this is confusing. I dont know how to put pic here so i cant show you.

 

[^pomen_GTR^]

some reference people who success with their project ....

this one high risk kena when puspakom...cut the body shorter woooo.....

If you said that evo3 boot a little bit shorter than wira how they can plug and play the top cover of boot on wira?? ...some of them just plug and play gsr/evo3 top cover of the boot and combine it with wira tail light reflector....:hmmmm:

u mean this cover?

http://img.rnudah.com/images/38/3889685294.jpg

some ppl do like this at the rear light, keep original wira light but then cut the light so it becomes a straight line at the part where it touch the number plate and then put evo 3 reflector so it still is wira light but with evo 3 reflector.

Sorry if this is confusing. I dont know how to put pic here so i cant show you.

to flalery...this is what ppl mean plug n play evo3 bonet on wira (cut n paste) after did this job no problem to switch back to wira bonet or using this back...they take the skin of evo3 bonet and put on wira bonet...

http://img.rnudah.com/images/74/7409789259.jpg

http://img.rnudah.com/images/74/7429115725.jpg

http://img.rnudah.com/images/74/7492742621.jpg

http://img.rnudah.com/images/58/5800378757.jpg

http://img844.imageshack.us/img844/1968/16469719117734422891510.jpg



#see the last picture of red wira not only the bonnet was cut&pasted....the bumper also cut&pasted to get the evo3 look

 

[DracBrax]

yeah thanks Pomen GTR

 

[flarery]

yeah thanks Pomen GTR

Pomen GTR "org lama banyak ilmu" ....