JZ users thread (1JZ, 1.5JZ, 2JZ)

[stormlcc]

Thanks Bro Storm LCC for your comment. So what measures so far you have taken. How about your ride condition right now. Is it still driveable.?
In my case I drove to Cherating from K.L with that problem. It was not fun at all when the time you have to slow your car, it will shudder like those bulldozers or tractors.
Forgot to mention that we have changed it's ecu as well. For info, this problem occurs during drving and at idle as well. Anybody here can supply me with the contact number or the address of the workshop.

my mechanic no time to check everything yet, so far only basic stuff like air intake, petrol pump, filters and spark plugs were checked and they all looked fine. if drive without pushing the pedal hard, it's ok, no boost, no problem, going uphill also ok because got lots of low down torque, just can't boost. if WOT the engine will missfire like hell all the way to the red line.

 

[BLaCkHoWLiNG]

try the ignition / timing sensors..sometimes when d car is not pushed.. it's ok.. when it's pushed.. if it's cracked.. it goes out of position... unable to read timing bla bla bla. then misfire

 

[stormlcc]

try the ignition / timing sensors..sometimes when d car is not pushed.. it's ok.. when it's pushed.. if it's cracked.. it goes out of position... unable to read timing bla bla bla. then misfire

where is the timing sensor located?

 

[BLaCkHoWLiNG]

http://www.supraforums.com.au/forum/a70-mkiii-discussion/61519-1jz-crank-angle-sensor-cam-position-sensor.html

 

[stormlcc]

http://www.supraforums.com.au/forum/a70-mkiii-discussion/61519-1jz-crank-angle-sensor-cam-position-sensor.html

thanks mate. i assume u r quite familiar with the engine? u r a mechanic right?

 

[BLaCkHoWLiNG]

My belly is too big to be a mechanic. If I was a mechanic, I would be stuck under a car.. and would not be noticed until i've died and emit stench to the surrounding. ..If i was a mechanic, I wouldnt be able to reach the plug coils of a 2JZ or 1JZ whether I'm standing in the front, or accessing it from the side fenders... Sorry mate... I aint a mech.. but I know abit about cars

 

[stormlcc]

My belly is too big to be a mechanic. If I was a mechanic, I would be stuck under a car.. and would not be noticed until i've died and emit stench to the surrounding. ..If i was a mechanic, I wouldnt be able to reach the plug coils of a 2JZ or 1JZ whether I'm standing in the front, or accessing it from the side fenders... Sorry mate... I aint a mech.. but I know abit about cars

lol. understood. u still driving your orange supra?

got any mechanics to recommend? I'm living in Ipoh and my trusted mechanic is ALWAYS busy, the car has been stuck in his workshop for almost 2 months...

 

[BLaCkHoWLiNG]

stormlcc - not anyone in Ipoh.

Yeah... i still have my Supra... but x drive it as much as i could

 

[stormlcc]

stormlcc - not anyone in Ipoh.

Yeah... i still have my Supra... but x drive it as much as i could

how about anyone in your area? KL / PJ? I'm sure u know some experienced mechanics

 

[kim78]

how about anyone in your area? KL / PJ? I'm sure u know some experienced mechanics

Yeah.. or maybe we can start a list of workshops that 'knows' this engine.. especially in KL or Selangor area.
I really need a reliable mech now...

 

[DanzEterna]

bring it to Daz Garage in PJS 1.

 

[kim78]

Thanks Bro, will Google it..appreciate.

 

[hasranizam]

Hello guys, i have one 1jz manual gearbox r154 (linkage type) for sale .. Please contact me 0163657036 hasra.. Thanks!

 

[speed44]

Hello guys, i have one 1jz manual gearbox r154 (linkage type) for sale .. Please contact me 0163657036 hasra.. Thanks!

May I know where is your location ?

 

[hasranizam]

May I know where is your location ?

Shah alam bro, please whatsapp 0163657036 for faster response since im not always in

 

[nashlovebrown]

Bro looking for 2jz 6 speed for manual convert . Do PM me if anyone selling . Thx

 

[lexuskoh]

how about anyone in your area? KL / PJ? I'm sure u know some experienced mechanics

--------------------------------------------------------------------------------

try go kepong Jinjang - JT Auto Works (03-6259 8033 / 013-333 5831)
He did a lot 1jz halfcut job.

 

[cyborg8071]

looking for toyota crown 1jz vvti jzs171 dashboard...anyone have pls watsapp 0126987824 tq

 

[Godking1029]

Whats the 2JZ engine price nowadays??

How much the cost R154 modify to join 2jz?