Jasma 4g13 cam shaft

[MYKE70]

Hi all...

anyone have experience with jasma 4g13/15 cam?are this cam give more power then oem cam?

and are this cam reliable?

hope can share with me your experience..

thanks

 

[LittleWhiteWagon]

Hi all...

anyone have experience with jasma 4g13/15 cam?are this cam give more power then oem cam?

and are this cam reliable?

hope can share with me your experience..

thanks

Jasma is a Japanese exhaust quality control brand, think of it as SIRIM but for Exhausts...


Whatever thats not exhaust related to JASMA is pirated stuff, they never made gauges lah, crank pulleys, now camshaft pun ada?

All the best if you want to use it. Try matspeed or powerzone, these should be more reliable

P.S Where did you see this 'Jasma' camshaft anyawy?

 

[BLANk]

after pipercam...

here come's jasma...

 

[darrengoh89]

jasma cam = pipercam

 

[khoyos]

i have a friend who tested the camshaft on dyno, comparison before and after. on a bone stock 4g13 with all stock (stock carb n filter, stock extractor n exhaust system, u get what i mean when i say stock). the jasma cam yielded 8whp. thats a genuine test, not just "claiming" power increase.

here's the link Getting It Bigger: Jasma Performance Camshaft 4G13 & 4G15 anyone? cheaper? Bagus ke?

 

[contreasjun27]

Hi all...

anyone have experience with jasma 4g13/15 cam?are this cam give more power then oem cam?

and are this cam reliable?

hope can share with me your experience..

thanks

yes is very good coz my friend been using it..
he say the power is better than piper cam LOL..
and jasma cam is fully billet cam not regrind cam bro

---------- Post added at 09:16 PM ---------- 6 hour anti-bump limit - Previous post was at 09:14 PM ----------

jasma cam = pipercam

pipercam is regrind cam
Jasma cam is fully Billet cam not regrind cam
conclusion Jasma dont equal to Pipercam

 

[darrengoh89]

yes is very good coz my friend been using it..
he say the power is better than piper cam LOL..
and jasma cam is fully billet cam not regrind cam bro

---------- Post added at 09:16 PM ---------- 6 hour anti-bump limit - Previous post was at 09:14 PM ----------



pipercam is regrind cam
Jasma cam is fully Billet cam not regrind cam
conclusion Jasma dont equal to Pipercam

\

ya arh ? i thought the lift and duration is the same ? :hmmmm:

 

[SkYwAlKeR]

Jasma is a Japanese exhaust quality control brand, think of it as SIRIM but for Exhausts...


Whatever thats not exhaust related to JASMA is pirated stuff, they never made gauges lah, crank pulleys, now camshaft pun ada?

All the best if you want to use it. Try matspeed or powerzone, these should be more reliable

P.S Where did you see this 'Jasma' camshaft anyawy?

in japan, JASMA is called Japanese Sports Muffler Association... its a governing body which controls the quality of japan made mufflers...

in bolehland, we bolehpeople USE jasma as a brand... hence, local jasma is a brand, its not a governing body in japan....

its all about marketing gimmick... same as local WORKS ENGINEERING, local MINES, local GAB, etc....

pipercam is regrind cam
Jasma cam is fully Billet cam not regrind cam
conclusion Jasma dont equal to Pipercam

jasma cam is billet cam??... u sure bo??.. how come i can see rough finishing on the sides similar to those cast iron ones??... :hmmmm:

 

[LittleWhiteWagon]

in japan, JASMA is called Japanese Sports Muffler Association... its a governing body which controls the quality of japan made mufflers...
in bolehland, we bolehpeople USE jasma as a brand... hence, local jasma is a brand, its not a governing body in japan....

its all about marketing gimmick... same as local WORKS ENGINEERING, local MINES, local GAB, etc....



jasma cam is billet cam??... u sure bo??.. how come i can see rough finishing on the sides similar to those cast iron ones??... :hmmmm:

Exactly... im kind of sceptical about anything branded jasma haha . But anyway its a buy at your own risk thing lah, you want to buy go ahead and try right? :proud:

 

[Shinjite]

8.2WHP increase from a bone stock 4G13 carb
Impressive~~

 

[contreasjun27]

in japan, JASMA is called Japanese Sports Muffler Association... its a governing body which controls the quality of japan made mufflers...

in bolehland, we bolehpeople USE jasma as a brand... hence, local jasma is a brand, its not a governing body in japan....

its all about marketing gimmick... same as local WORKS ENGINEERING, local MINES, local GAB, etc....



jasma cam is billet cam??... u sure bo??.. how come i can see rough finishing on the sides similar to those cast iron ones??... :hmmmm:

is really a billet cam bro
dont believe buy one and see for urself hehe
im selling at a very good price!

 

[ae101rulez]

ahah...at first also i skeptical over this...den my friend installed this on his megavalve fiore...hehehe...really got difference ohh..ahaha..lols..price also kinda reasonable...

 

[SkYwAlKeR]

is really a billet cam bro
dont believe buy one and see for urself hehe
im selling at a very good price!

i'm selling it as well... from my understanding, it does not reassembles a billet cam...

 

[contreasjun27]

i'm selling it as well... from my understanding, it does not reassembles a billet cam...

LOL but based on the information from the supplier is a billet cam haha..
and it is pretty well built for this cam

 

[nurburing]

8hp @.@

 

[contreasjun27]

8hp @.@

8hp is very much for NA man

 

[SkYwAlKeR]

LOL but based on the information from the supplier is a billet cam haha..
and it is pretty well built for this cam

billet cam also got rugged surface like this??...

as oppose to billet cam finishing...

 

[LittleWhiteWagon]

The jasma looks cast weih... haha

 

[fawzi]

how much u r selling on it..can u give me a good price after discount hiihihihi

 

[contreasjun27]

billet cam also got rugged surface like this??...

as oppose to billet cam finishing...

I understand bro...
and I know how is billet finishing is..
well if the jasma cam finishing is as good as the other picture you are showing at then the price definately will be way way much higher bro..