Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="papagoines" data-source="post: 1063647304" data-attributes="member: 22794">1.8 inch aaa? why not go all the way to 2 inch? maybe your exhaust is stuffed at higher rpms? which no good for a turbo your size heherather than use a center bullet (cylinder thingie wif some sound-muffling packaging), better use resonator (same as bullet but w/o said packaging, just a hollow pipe with a bit enlarge body)... how to differentiate between the 2? if you 'jentik' the bullet, it produce no sound... but for resonator it gave a loud 'TING' soundfor example my exhaust setup for wee original RHF3 turbo in a L5 engine.. its an original FGK Power Getter unit originally for Mira L5 4cyl turbo.. description is in the pichttp://i42.photobucket.com/albums/e346/papagoines/Cars/My%20Ride/Mechanicals/JB-JL/IMG_2369-Explained.jpgFrom cat converter (no money to do custom downpipe yet huhuhu) to mid mufflerhttp://i42.photobucket.com/albums/e346/papagoines/Cars/My%20Ride/Mechanicals/JB-JL/IMG_2371-Explained.jpgFrom mid muffler to tip... you can see the resonator near the tipThe sound? at idle it sounded like this (if inside car, you felt the engine is louder hehe)<a href="http://www.youtube.com/watch?v=Wce7EOUjZsw" target="_blank">‪My exhaust sounds after converting to FGK single pipe version‬‏ - YouTube</a>after 4k rpm it progessively louder and louder... but still bassy and it won't resonate inside the car, rather the bassy loudness heard as if it was a few meter away at the back of the car at high rpmso by logic, if you go 2inch all the way + 1 resonator + biggest 2inch muffler you can fit = nice burbly, bassy and progressively louder zorst setupor... you can consult one of zth thread that discuss such topic here <a href="http://www.zerotohundred.com/newforums/car-modification/128441-exhaust-modification-corner.html" target="_blank">http://www.zerotohundred.com/newforums/car-modification/128441-exhaust-modification-corner.html</a>.. the thread starter also owns a exhust business hehe</blockquote>

Verification

The Marketplace Latest

original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

what turbo is this?

anyone can help me or give me info about this turbo...its a garret A/R 60 m24. (ignore the TDO4L on the right side) tq...

View attachment 647409

F1: No Race In Indianapolis 2008

F1: No Race In Indianapolis 2008, MotorGP takes over! (updated)

View attachment 626628

Grandprix.com has reported that there will be no schedule on the upcoming 2008 F1 races at Indianapolis, USA.

The...

Who can DIY for me?

Who can DIY CAI & DIY HeatShield for me? I m driving a Satria w/ a SIMOTA open pod air filter.........pls offer me a price, this include the materials & ur labour charge........thanks!!

pls help, i m...