Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="E3newbie" data-source="post: 1651121" data-attributes="member: 36783">Dear Sifus,WoW!! You guys really know your stuff!!! Maybe you guys can help me out a little... I'm driving a perdana but i really like to modify cars so i went to a workshop that told me that the best way to mod is to transplant a v6 twin turbo. I did the transplant but opted for a auto trans which i found out was a big mistake. The tourque converter gave me lots of trouble. It was jerking since day one, I asked my mech and he said it's like that cos 4wd lock 2 wheels is like that...I went to another mech who said that i shouldn't have chosen athe 6a12tt cos its very troublesome and difficult to maintain. Worse, he told me that it's very difficult to get more H/ps.... After losing to several supposedly less powerfull cars, i became fustrated enough to go get a E3 half cut. I went back to the first mech to have it transplanted, he told me two weeks. It turned out that my car was stuck there for 6 weeks!!! I later found out that he has no experience transplanting a E3 into perdana. His mountings were so badly done that it cracked after just 1 week!! i sent the car back for many times but still he couldn't rectify it!! He actually used WASHERS to weld and support the mountings!! The car vibrates like hell when i drag cos the mounting touches the chasis!!! I gave up going to him and went to another mech. He did some adjustments and its better now. Still i think that the mounting is still not very well done. I also find that the power from an E3 should be much better, so i went to visworks. They recomended unichip but i was already broke from spending so much on this car so they told me to just put a chip. I also added a sard fuel regulator, walbro255 and told them to dyno it. The results were dissapointing! 205hp before 252hp after all the add ons at 1.1bar.I thought E3 was already 276hp stock!!?? how come after chip still only 252?? They said something wrong wif my engine!! Will it never end? how can i get more horses, I work in singapore and i get wacked by their stock wrx that supposed to be only 220 hps. This is my position Sifus, Please advise!!!!</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing TC4 18x8.5...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing ZE40 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing INGS TS06 18x8jj...
- Started by david tao
- Chassis and Wheels
New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Top Gear's "Faster than an Evo Challenge"

https://www.zerotohundred.com/wp-content/uploads/2011/10/3040423443_d075f91398.jpg

I've decided to post some videos to poke fun at Izso's "Car modification - the dummies guide". While Izso has brought up most of the...

question about altezza bush...

hi all taiko... have anyone here got change their car bushing b4??? usually change back to original type or aftermarket??? how to know its time to change?? :driver:

Custome Made Engine Top Cover

Custom made fully stainless steel with mirrow finishing engine top cover.
Have it done on my ride. Thought of sharing to the quality of work done.

View attachment 635077

Selling price :

MLOC Member...