Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="B18C-R" data-source="post: 3510390" data-attributes="member: 78534">jssim, if your's is indeed e6, it doesn't comes with immo on stock ECU and setup. So if that is true and I'm right, then ur immo is a 3rd party aftermarket which makes no sense to remap your ECU then.It will help us to give you better opinion if you share your ECU type/brand and if you know, brand of your immo. We can have better discussion from then on if we know this.Now assuming I'm right, then what evolutionZ suggested is on my mind to. take remove the entire immo 1st and see if the car and it's ecu works at its basic. It's not wise to have a 3rd party immo mount and 'hack' into ur ori ecu, unless ur talking about e9 where the ecu is programmed with immo in it, built in.remember also that in any immo setup, never take 'acc power' from ECU or splice ECU +ve as this would reduce the required amps and voltage for the ECU hence screwing up some of the sensors data or input voltage back to ur ecu and at times, will malfunction. Some non-professional immo or alarm installer would take the easy way out and just 'borrow' power from the existing accessories or ECU to ur alarm and this will create trouble sometimes.Lastly, is a free forum and dun take everything and opinion here,, it may be right or otherwise, there's no 100% for sure as everyone is trying to help based on what they know or felt. Make your time to more research, ask many ppl and installer before decising your option before investing your hard earned $$$.</blockquote>

Verification

The Marketplace Latest

New original Defi Advance A1 NA package triple...
- Started by david tao
- Engine and Performance
original rare Rays Volk Racing CE28 16x7jj offset...
- Started by david tao
- Chassis and Wheels
Honda Jazz/Fit JSracing GTwing Spoiler
- Started by jeff6126
- Exterior and Body
Toyota Vios NCP93 front bonnet hood
- Started by jeff6126
- Exterior and Body
Honda civic fc varis spoiler
- Started by jeff6126
- Exterior and Body
BMW F10 Msport front bumper set
- Started by jeff6126
- Exterior and Body
BMW F30 M3/GTS front bonnet hood
- Started by jeff6126
- Exterior and Body
BMW F10 vorsteiner rear bumper diffuser
- Started by jeff6126
- Exterior and Body
Mitsubishi Lancer Evo bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 M3 front skirt lip
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

ALCON 6pot for EVO in-the-House

Hi all,
the ALCON 6pot brake kit for EVO7/8/9 has arrived.

please visit TRIAL Tuning to have a closer look at the goods.

the kit includes :
ALCON mono-block 6 pot caliper
343mm rotor
Brake hose (front pair)
Brake...

do u guys know where to get.....

do u guys know where to get auto current cut off device????
try to find in pasar road liaw but did't find it.

this device is ued as this way.....
the input of the amp is radom,sometimes very high and sometimes very...

using other g/box with standard gsr

heheh...more gsr related questions...

wats the benefits of using 2wd g/box instead of using the locked gsr g/box?? no power loss cos its fwd...anything else??

wat types of manual g/box is best if i like...